Nanomeghyas

Nanomeghyas

Fabrication of composite electrode based on graphene / iron / copper for use in electrical energy storage devices

Document Type : Original Article

Authors
1 Department of physics, Shahid Beheshti university
2 Department of physics,, Shahid Beheshti university
Abstract
In this paper, Graphene was exfoliated and doped simultaneously with magnetic metals and their oxide derivatives based on electrochemical method. The electrochemical properties of the as-prepared samples are investigated as advanced electrode materials for supercapacitors which was coated on nickel foam substrate. The structure and composition of the synthesized samples were studied by X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS) and Raman spectroscopy. The morphologies were characterized by field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM) and High-resolution transmission electron microscopy (HRTEM). Cyclic voltammetry and galvanostatic charge-discharge measurments have shown that the behavior of the synthesized material is battery-like. According to the results of the specific capacity at different scan rates of 5, 10, 20, 30, 40, 50 and 70 mV/s in 1 M KOH, the highest capacity related to the scan rate of 5 mV/s, which has a capacity equal to 1124.63 F/g.

[1] C. Liu, F. Li, M. Lai-Peng, and H. M. Cheng, “Advanced materials for energy storage,” Adv. Mater., 22, 28–62, 2010.
 
[2] H. Liu, J. Zhu, Z. Li, Z. Shi, J. Zhu, and H. Mei, “Fe2O3/N doped rGO anode hybridized with NiCo LDH/Co(OH)2 cathode for battery-like supercapacitor,” Chem. Eng. J., 403, 126325, 2021.
 
[3]Vangari, M., Pryor, T. & Jiang, L. Supercapacitors: Review of materials and fabrication methods. J. Energy Eng. 139, 72–79 2013.
 
[4] S. K. Shinde et al., “Designing of nanoflakes anchored nanotubes-like MnCo2S4/halloysite composites for advanced battery like supercapacitor application,” Electrochim. Acta, 341, 135973, 2020.
 
[5] C. Liu, Z. Yu, D. Neff, A. Zhamu, and B. Z. Jang, “Graphene-based supercapacitor with an ultrahigh energy density,” Nano Lett., 10, 4863–4868, 2010.
 
[6] S.Z. Inamuddin, Mohammad Faraz Ahmer, Abdullah M. Asiri, Electrochemical Capacitors: Theory, Materials and Applications. 2018.
 
[7] E. Frackowiak and F. Béguin, “Carbon materials for the electrochemical storage of energy in capacitors,” Carbon N. Y., 39, 937–950, 2001.
 
[8] A.G. Pandolfo and A. F. Hollenkamp, “Carbon properties and their role in supercapacitors,” J. Power Sources, 157, 11–27, 2006.
 
[9] L. Wang, Y. Li, Z. Han, L. Chen, B. Qian, X. Jiang, J. Pinto, and G. Yang, “Composite structure and properties of Mn3O4/graphene oxide and Mn3O4/graphene,” Journal of Materials Chemistry A, 2013.
 
[10] X. Xia, Q. Hao, W. Lei, W. Wang, D. Sun, and X. Wang, “Nanostructured ternary composites of graphene/Fe 2O 3/polyaniline for high-performance supercapacitors,” J. Mater. Chem., 22, 16844–16850, 2012.
 
[11] D. Wang, Y. Li, Q. Wang, and T. Wang, “Nanostructured Fe 2O 3-graphene composite as a novel electrode material for supercapacitors,” J. Solid State Electrochem., 16, 2095–2102, 2012.
 
[12] Z. Wang, C. Ma, H. Wang, Z. Liu, and Z. Hao, “Facilely synthesized Fe2O3-graphene nanocomposite as novel electrode materials for supercapacitors with high performance,” J. Alloys Compd., 552, 486–491, 2013.
 
[13] V.B. Mohan, M. Nieuwoudt, K. Jayaraman, and D. Bhattacharyya, “Quantification and analysis of Raman spectra of graphene materials,” Graphene Technol., 2, 47–62, 2017.
 
[14] H. Qian, B. Wu, Z. Nie, T. Liu, P. Liu, H. He, J. Wu, Z. Chen, and S. Chen, “A flexible Ni3S2/Ni@CC electrode for high-performance battery-like supercapacitor and efficient oxygen evolution reaction,” Chemical Engineering Journal, 30, 127646, 2020.
 
[15] A.E. Elkholy, A.S. Dhmees, F.E.T. Heakal, and M. A. Deyab, “Mesoporous ZnMoS4 as a supercapacitor electrode material with battery-like behavior,” New J. Chem., 43, 4, 1987–1992, 2019.
 
[16] A. V. Thakur and B.J. Lokhande, “Electrolytic anion affected charge storage mechanisms of Fe3O4 flexible thin film electrode in KCl and KOH: a comparative study by cyclic voltammetry and galvanostatic charge–discharge,” J. Mater. Sci. Mater. Electron., 28, 11755–11761, 2017.
 
 
[17] L. Xie, S. Chen, Y. Hu, Y. Lan, X. Li, Q. Deng, J. Wang, Z. Zeng, and S. Deng, “Construction of phosphatized cobalt nickel-LDH nanosheet arrays as binder-free electrode for high-performance battery-like supercapacitor device,” Journal of Alloys and Compounds, p. 157652, 2020.
 
[18] S. Vijayakumar, S.-H. Lee, and K.-S. Ryu, “Hierarchical CuCo2O4 nanobelts as a supercapacitor electrode with high areal and specific capacitance,” Electrochimica Acta, 182, 979–986, 2015.
 
[19] Z. Fahimi and O. Moradlou, “Fabrication of ZnO @ C foam : A fl exible free-standing electrode for energy storage devices,” Mater. Des., 189, 108525, 2020.
 
[20] L. Abbasi, M. Arvand, and S. E. Moosavifard, “Facile template-free synthesis of 3D hierarchical ravine-like interconnected MnCo2S4 nanosheet arrays for hybrid energy storage device,” Carbon 10, 299–308, 2020.
 
[21] J.B. Cook, T. C. Lin, H.S. Kim, A. Siordia, B. S. Dunn, and S. H. Tolbert, “Suppression of Electrochemically Driven Phase Transitions in Nanostructured MoS2 Pseudocapacitors Probed Using Operando X-ray Diffraction,” ACS Nano, 13, 1223–1231, 2019.
 
[22] M. D. Stoller and R. S. Ruoff, “Best practice methods for determining an electrode material’s performance for ultracapacitors,” Energy Environ. Sci., 3, 1294–1301, 2010.
 
[23] S. Ghasemi and F. Ahmadi, “Effect of surfactant on the electrochemical performance of graphene / iron oxide electrode for supercapacitor,” J. Power Sources, 289, 129–137, 2015.
 
[24] Z. Song, W. Liu, P. Xiao, Z. Zhao, G. Liu, and J. Qiu, “Nano-iron oxide ( Fe 2 O 3 )/ three-dimensional graphene aerogel composite as supercapacitor electrode materials with extremely wide working potential window,” Mater. Lett., 1–4, 2015.
 
 
[25] M. Aghazadeh and I. Karimzadeh, “Fabrication of high performance metal ion doped iron-oxide electrode for supercapacitor applications through a novel platform,” Mater. Res. Express, 4, 105505, 2017.

  • Receive Date 10 January 2021
  • Revise Date 10 April 2021
  • Accept Date 14 February 2021