@article { author = {Ranjbar Donchali, Y. and Akbarzadeh Pasha, M. and Chaeichi, M.J.}, title = {The Effect of Synthesis Parameters on Crystal Structure and Morphology of CNT-ZnO Hybrid Nanostructures}, journal = {Nanoscale}, volume = {5}, number = {3}, pages = {235-245}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this research, Carbon nanotubes-Zinc oxideCNT-ZnO hybrid nanomaterial was prepared by a polyol sol-gel method using zinc acetate ZnCH3COO2.H2O, functionalized CNT with carboxyl COOH group and two kind of solvent; diethylene glycolDEG and glycerolGLY and the effect of three synthesis parameter: kind of solvent, pH of solution and amount of additive water on properties of end-product hybrid was investigated. The synthesized nanomaterials were characterized by field emission scanning electron microscopy FESEM, Transmission electron microscopyTEM, Fourier transform infrared spectroscopy FTIR, energy dispersive X ray spectroscopy EDX and X ray diffraction XRD. In synthesis of hybrid structures using diethylene glycol, it was found that by increasing the PH of solution, the average size of ZnO nanoparticles deposited on CNT surfaces dramatically decreases and the number of them increases. Furthermore by increasing the PH of solution the uniformity of ZnO deposition was considerably improved. By changing the solvent and using glycerol a new morphology of hybrid structure was obtained and zinc oxide in form of nanosheets and hexagonal nanocrystal segments attached to the body of CNTs. By increasing the amount of deionized water, hydrolysis reaction and thus deposition of ZnO on CNTs’ body increases.}, keywords = {CNT-ZnO,Hybrid structure,Polyol sol-gel,pH of solution,Solvent}, title_fa = {اثر شرایط ساخت بر ساختار بلوری و مورفولوژی نانوساختارهای هیبریدی نانولوله کربنی- اکسید روی}, abstract_fa = {در این پژوهش نانو مواد هیبریدی نانولوله کربنی چند دیواره- اکسید رویMWCNT-ZnO به روش سل-ژل پلی یولی با استفاده از استات روی دوآبه ZnCH3COO2.2H2O و نانولوله کربنی عاملدار با گروه کربوکسیلCOOH و دو نوع حلال دی اتیلن گلیکول و گلیسیرین ساخته و تاثیر سه پارامتر نوع حلال، pH محیط و میزان آب افزودنی بر محصول نهایی بررسی شد. تمامی نانو مواد تهیه شده به وسیله آنالیزهای میکروسکوپ الکترونی روبشی گسیل میدانیFESEM، میکروسکوپ الکترونی عبوریTEM، طیف‌سنجی تبدیل فوریه مادون قرمزFTIR، طیف‌سنجی تفکیک انرژی پرتو ایکسEDX و پراش اشعه ایکسXRD مشخصه‌یابی شدند .در ساخت MWCNT-ZnO با استفاده از حلال دی اتیلن گلیکول مشاهده شد که با افزایش pH محلول، اندازه نانوذرات اکسید روی پوشش داده شده روی سطح نانولوله کربنی در ساختارهای هیبریدی بشدت کاهش و تعداد آن‌ها افزایش و پوشش یکنواخت‌تری ایجاد می‌شود. با تغییر حلال و استفاده از گلیسیرین در ساخت هیبرید مورفولوژی جدیدی شکل گرفته و اکسید روی بصورت نانوصفحات و نانوقطعات کریستالی تقریباً شش ضلعی به بدنه نانولوله های کربنی متصل می‌شود. با افزایش میزان آب دیونیزه حاضر در واکنش، فرآیند هیدرولیز افزایش یافته و اکسید روی بیشتری روی نانولوله‌ها نشست می‌کند.}, keywords_fa = {نانولوله کربنی-اکسید روی,نانوساختار هیبریدی,سل ژل پلی‌یولی,pH محلول,نوع حلال}, url = {https://nanomeghyas.ir/article_46512.html}, eprint = {https://nanomeghyas.ir/article_46512_2407f1aedebb5973f9780ac93cfb06be.pdf} }