انجمن نانوفناوری ایراننانومقیاس2423-56287120200320Spin and charge quantum pumping in zigzag silicene
nanoribbon and investigating the effect of width on
pumped currentsپمپ جریان های باری و اسپینی در نانونوارهای سیلیسینی زیگزاگ و بررسی اثر پهنا بر جریانهای پمپ شده11246335FAفاطمه بوربورگروه فیزیک، دانشکده علوم پایه، دانشگاه آزاد اسلامی واحد علوم و تحقیقات، تهران، ایرانمهدی اسماعیل زادهدانشکده فیزیک،دانشگاه علم وصنعت ایران،نارمک تهران،ایرانسیدمحمد الهیگروه فیزیک، دانشکده علوم پایه، دانشگاه آزاد اسلامی واحد علوم و تحقیقات، تهران، ایرانلیلا اسلامیگروه فیزیک، دانشکده علوم پایه، دانشگاه آزاد اسلامی واحد علوم و تحقیقات، تهران، ایرانالهام دارابیگروه فیزیک، دانشکده علوم پایه، دانشگاه آزاد اسلامی واحد علوم و تحقیقات، تهران، ایرانJournal Article20201018In this work, the spin polarized currents based on zigzag silicene nano-ribbon (ZSNR) in adiabatic regime has investigated by using Keldysh Green function method. For generating spin pumped current, two times dependent potential in two side of system is used in the presence of ferromagnetic exchange field is used. In this condition with applying electric field one can induce 100% spin polarized pumped current. We also investigate the effects of width zigzag silicone nanoribbons (ZSNR) and compare them with zigzag graphene nanoribbon (GNR) and show that the pumped charge current in the ZSNR is nearly the same for odd and even numbers of carbon chains but in the zigzag graphene nanoribbon (ZGNR) strongly depends on nanoribbon width such that the maximum pumped current for width with even numbers of carbon chains is at least five times larger than the with odd numbers.در این پژوهش، با استفاده از روش تابع گرین کلدیش، جریانهای پمپ شده اسپینی در نانونوارهای سیلیسینی زیگزاگ<br />در رژیم آرام تغییر (آدیاباتیک) بررسی شده است. برای پمپ جریان اسپینی از دو میدان وابسته به زمان در دو طرف سامانه در<br />حضور میدان مغناطیسی تبادلی استفاده شده است. در این شرایط با اعمال میدان الکتریکی میتوان جریان پمپ شده %۱00<br />قطبیده القا کرد. همچنین، اثر پهنا بر شدت جریانهای پمپ شده باری بررسی کرده و نشان دادهایم که در نانونوارهای<br />سیلیسینی با تعداد زنجیره های زوج و فرد شدت جریان پمپ شده تقریبا یکسان است. برخلاف نانونوارهای گرافینی که شدت<br />جریان پمپ شده باری در پهناهای با تعداد زنجیره های زوج بیشتر از فرد است.https://nanomeghyas.ir/article_46335_bef0f51e9f919a0058c26e9b75f1605c.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320Highly efficient removal of Congo red by MIL-101 (Fe)
@PDopa@Fe3O4حذف بسیار موثر کنگو قرمز با استفاده از نانوچندسازه MIL-101 (Fe) @PDopa@Fe3O4132446337FAاسما حامدیگروه فیزیک، دانشگاه یزد، یزدمحمود برهانی زرندیگروه فیزیک، دانشگاه یزد، یزدمحمدرضا ناطقیگروه شیمی، دانشگاه آزاد اسلامی یزد، یزدعلی محمد حاجی شعبانی یزدیگروه شیمی، دانشگاه یزد، یزدJournal Article20201018A magnetic metal-organic framework (MOF) composite, MIL-101(Fe) @PDopa@Fe3O4, was synthesized as the stable adsorbent for removal of Congo red (CR) from water. That very thin film of 3,4-dihydroxy-L-phenylalanine (L-Dopa) was used as an efficient and environmentally friendly binder between Fe3O4 nanoparticles and MIL-101(Fe). The synthesized nanocomposite was investigated by SEM, TEM, FT-IR,<br />XRD and TGA analyzes. Magnetic properties of the composite were studied by vibrating sample magnetometer (VSM). Zeta potential analysis was also performed to determine the surface charge of the nanocomposite. Influencing factors such as pH, contact time, adsorbent dosage, temperature, and initial dye concentration on the adsorption ability of the MIL-101(Fe) @PDopa@Fe3O4 were investigated. The very excellent adsorption capacity about 909 mg/g for CR was achieved. Adsorption kinetics and isotherms studies indicated that CR adsorption followed Langmuir isotherm model and pseudo second-order kinetic model. Studies have also shown that The MIL-101(Fe) @ PDopa@Fe3O4 was found to be recyclable for removal of CR.جاذب پایدار مغناطیسی با عنوان MIL-101 (Fe) @PDopa@Fe3O4به منظور حذف رنگ کنگو قرمز از محیط آبی سنتز شد. یک فیلم نازک از 3,4-dihydroxy-L-phenylalanineبه عنوان یک اتصال دهنده کارآمد و دوست دار محیط زیست بین ذرات Fe3O4 وMIL-101 (Fe) استفاده شد. نانوچندسازه سنتز شده با استفاده از آنالیزهای SEM,TEM, FT-IR, XRDو TGAمورد بررسی قرار گرفت. ویژگی مغناطیسی چندسازه با استفاده از مغناطیسسنج نمونه برداری ارتعاشی ) (VSMمورد بررسی قرار گرفت. همچنین، برای تعیین بار سطحی نانوچندسازه آنالیز زتا پتانسیل انجام شد. عوامل تاثیر گذار مانند ، pHزمان تماس، مقدار جاذب، دما و غلظت اولیه رنگ برقابلیت جذب مورد بررسی قرار گرفت. ظرفیت جذب بالایی در حدود ۹0۹میلی گرم بر گرم برای کنگو قرمز به دست آمد. سینتیکهای جذب و مطالعات ایزوترم نشان داد که جذب کنگو قرمز از مدل همدما لانگمویر و مدل سینتیکی شبه مرتبه دوم پیروی میکند. همچنین، بررسیها نشان داد که MIL-101 (Fe) @PDopa@Fe3O4برای حذف کنگو قرمز قابل بازیافت است.https://nanomeghyas.ir/article_46337_fa23bbfcc5f38783cd53eebf8ba7a2b5.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320The effects of stable substrate temperature on the
quality of ZnO films prepared by pulsed laser
depositionبررسی اثر پایداری دمای زیرلایه بر کیفیت لایههای روی اکسید در روش لایه نشانی لیزری252946338FAمهرناز سیمدارگروه فیزیک، دانشکده فیزیک و شیمی، دانشگاه الزهرا، تهران، تهرانفائزه حسنیگروه فیزیک، دانشکده فیزیک و شیمی، دانشگاه الزهرا، تهران، تهرانسیده ثریا موسویگروه فیزیک، دانشکده فیزیک و شیمی، دانشگاه الزهرا، تهران، تهرانمحمد امین بصامگروه الکترونیک، دانشکده الکترونیک، دانشگاه صنعتی مالک اشتر، تهران، تهرانبتول سجادگروه الکترونیک، دانشکده الکترونیک، دانشگاه صنعتی مالک اشتر، تهران، تهرانJournal Article20201018Zinc oxide (ZnO) is one of the most widely used semiconductor metal oxides with extensive<br />applications in the manufacture of optical instruments do to its unique properties. The specificity of the films prepared by the use of this material depends directly on its deposition conditions. In this work, during the preparation of ZnO films by the pulsed laser deposition method, we fixed the volume and pressure parameters and considered the temperature factor as a varied factor by cooling down the substrate temperature to investigate the effect of thermodynamic parameters. The results of UV-visible absorption spectroscopy, microscopic and SEM images of the samples indicate that the quality of the films improves effectively under stable thermodynamic conditions.روی اکسید ( )ZnOیکی از پرکاربردترین اکسیدهای فلزی نیمرساناست که به دلیل داشتن ویژگیهای منحصر به فرد،<br />کاربرد فراوانی در ساخ توسایل نوری دارد. ویژگی لایههای تهیه شده از این ماده به صورت مستقیم افزون بر شرایط پرتودهی، به شرایط لایهنشانی آن نیز بستگی دارد. در این مقاله، با هدف بررسی ثبات شرایط ترمودینامیکی بر کیفیت انباشت لایههای ZnOبه روش لایهنشانی لیزر پالسی، مشخصههای حجم و فشار را در حین لایهنشانی ثابت در نظر گرفتیم و با سرد شدن تدریجی زیرلایه، عامل دما را بهعنوان عامل موثر در تغییر شرایط ترمودینامیکی بررسی کردیم. نتایج بدست آمده از بررسی طیف جذب مرئی- فرابنفش و تصاویر میکروسکوپی و SEMنمونهها حاکی از آن است که کیفیت لایهها در شرایط ترمودینامیکی پایدار به صورت موثری بهبود مییابدhttps://nanomeghyas.ir/article_46338_3e57a0569c1633dd3079234fabd2ced9.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320Synthesis of New Titania- Copper Nanocomposite and Its Role in Removal of Carbendazim as fungicides from Waterسنتز نانوچندسازه تیتانیا-مس جدید و نقش آن در حذف قارچکش کاربندازیم از آب304246372FAسروگل خوش خرامگروه شیمی، واحد تاکستان، دانشگاه آزاد اسالمی، تاکستان، ایرانمهدیه صادق پورگروه شیمی، واحد تاکستان، دانشگاه آزاد اسالمی، تاکستان، ایرانوحیده تاجر کجینه بافگروه مهندسی مواد، واحد تاکستان، دانشگاه آزاد اسالمی، تاکستان، ایرانJournal Article20201019<span class="fontstyle0">The world's population is rising and supplies of drinking water are declining. Water pollution by pesticides is considered as one of the environmental problemsand the removal of pesticides from water sources has<br />been of interest to researchers. One of the methods for removing toxins from water sources is the use of catalyst and photocatalyst materials. One of the most widely used materials in this field is titanium dioxide, which has been one of great interest to researchers for its photocatalytic properties. Studies have shown that this substance is used to remove phenol. However, few studies have been carried out to remove Carbendazim. In this research, it has been attempted to study and analyze the conditions for removal and degradation of Carbendazim as a pollutant by obtaining a catalyst based on titanium dioxide with a nanostructure. For this purpose, Titanium dioxide nanoparticles were synthesized by sol-gel methodand some copper was added as a pollutant. To identify and study the X-ray diffraction patterns (XRD), scanning electron microscopy (SEM), infrared (IR) spectroscopy, porosimetry (BET), ultraviolet-visible spectroscopy (UV-VIS) and energy X-ray Diffraction (EDX) was used. The results showed that the synthesized nanoparticle size was about 40-50 nm and the morphology of particles is spherical. The synthesized catalyst at 400 ° C had anatase phase. The anatase phase of this material was used for degradation of Carbendazim under photocatalytic conditions and the </span><span class="fontstyle2">p < /span><span class="fontstyle0">H parameter was also optimized. In fact, with the increase of the copper impurity at the value of 0.5 gr, the optical band gap has decreased and the absorbance has been shifted to the bulkier wavelengths. So, titania-copper composite with anatase phase and degradation of fungicidal Carbendazim with 88% yield, it can be used as a nanostructure photocatalyst for the removal of water pollutants.</span></span>جمعیت جهان در حال افزایش و منابع آب آشامیدنی رو به کاهش است. آلودگی منابع آب به وسیله سموم آفت کش یکی از معضلات زیست محیطی محسوب میگردد و حذف سموم از منابع آبی به منظور حفاظت از محیط زیست مورد توجه پژوهشگران قرار گرفته است. یکی از روشهایی حذف سموم از منابع آبی، استفاده از کاتالیستها و فوتوکاتالیستها میباشد. یکی از مواد بسیار پرکاربرد در این زمینه، دیاکسیدتیتانیوم است که به دلیل داشتن خاصیت فتوکاتالیستی، بسیار مورد توجه پژوهشگران قرار گرفته است. بررسیها نشان میدهد که از این ماده برای حذف فنول استفاده شده است. اما پژوهشهای اندکی در جهت حذف قارچکش کاربندازیم صورت گرفته است. در این پژوهش تلاش شده است تا با دستیابی به کاتالیستی برپایه دی اکسید تیتانیوم با ساختار نانو، شرایط حذف و تخریب قارچکش کاربندازیم به عنوان آلاینده مورد بررسی و تحلیل قرار گیرد. برای این منظور نانوذرات دی اکسید تیتانیم به روش سل-ژل سنتز شد و مقداری مس به عنوان آلاینده به آن اضافه شد. برای شناسایی و مطالعه فوتوکاتالیستهای سنتزشده از الگوی پراش اشعه ایکسXRD، میکروسکوپ الکترونی روبشیSEM، طیف سنجی مادون قرمزIR، تخلخل سنجیBET، طیف سنجی فرابنفش-مرئیUV-VIS و انرژی پراکندگی اشعه ایکسEDX استفاده شد. نتایج بدست آمده نشان داد که اندازهی نانوذرات سنتز شده حدود 50-40 نانومتر و مورفولوژی ذرات کروی میباشد. کاتالیزور سنتز شده در دمای°C 400 دارای فاز آناتاز میباشد. از فاز آناتاز این ماده برای تخریب کاربندازیم تحت شرایط فوتوشیمیایی استفاده شد و پارامترpH نیز بهینه شد. در واقع با افزایش ناخالصی مس به مقدار g5/0، گاف نواری نوری کاهش یافته است و جذب به سمت طول موج های بلندتر جابجا شده است. بنابراین کامپوزیت تیتانیا-مس با فاز آناتار و قابلیت تخریب قارچکش کاربندازیم با بازده 88، میتواند به عنوان یک فوتوکاتالیست نانوساختار مؤثر در حذف آلایندههای آبی بکار رود.https://nanomeghyas.ir/article_46372_49369eec49d3e70b6aab816bb367443e.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320Study of temperature and pressure effects on the adsorption of hydrogen on carbon nanotubes bundle by molecular dynamics simulationبررسی تاثیرات دما و فشار بر مقدار جذب هیدروژن بر دسته نانولولههای کربنی به وسیله دینامیک مولکولی435046371FAسعید اسدیدانشیار، گروه مهندسی مکانیک، دانشگاه پیام نور، تهران، ایرانآرش رحمانیفارغ التحصیل کارشناسی ارشد، گروه مهندسی مکانیک، واحد لاهیجان، دانشگاه آزاد اسلامی، لاهیجان، ایرانJournal Article20201019The use of hydrogen fuel is of great importance as an alternative to fossil fuels. Storage of hydrogen is<br />one of the major challenges of using this fuel, so study of the absorption and storage of hydrogen by carbon nanotubes is essential. The absorption of hydrogen in carbon nanotubes depends on various physical factors, that the most important of these factors are temperature and pressure. The aim of this study was to evaluate the effects of temperature and pressure on the hydrogen adsorption of the nanotube bundle. In this study, the amount of hydrogen absorption on carbon nanotube bundle was studied by molecular dynamics simulation, and then analyzed pressure and temperature variations. Hydrogen adsorption simulations were carried out on a quad carbon nanotube bundle and in nine different temperatures from 50 Kelvin to 200 Kelvin. The results show that hydrogen adsorption is highly dependent on temperature and pressure, so that the amount of adsorption increases significantly at low temperatures. It was found that the amount of adsorption was constant in a carbon nanotube bundle at temperatures range of 110 to 210 K, and was linear with increasing of temperature from 50 to 110 K. The results also show that the pressure variations are linear as first order with the temperature.استفاده از سوخت هیدروژنی بهعنوان یکی از منابع جایگزین سوختهای فسیلی، اهمیت فراوانی دارد. در این میان، ذخیرهسازی هیدروژن یکی از چالشهای مهم و بزرگ استفاده از سوخت هیدروژنی است، بنابراین، جذب و ذخیرهسازی هیدروژن با نانولولههای کربنی اهمیت زیادی پیدا کرده است. جذب هیدروژن در نانولولههای کربنی بستگی به عوامل فیزیکی متفاوتی دارد که از مهمترین آن ها دما و فشار است. هدف ازاین پژوهش، مطالعه تاثیرات دما و فشار بر مقدار جذب هیدروژن بر دسته نانولولههای کربنی است. در این پژوهش، با شبیهسازی دینامیک مولکولی، مقدار جذب هیدروژن بر یک دسته از نانولولههای کربنی بررسی شده و سپس، تغییرات فشار و دما مورد بررسی قرار گرفته است. نتایج نشان میدهد که مقدار جذب هیدروژن وابستگی زیادی به دما و فشار دارد به گونهای که در دماهای پایین مقدار جذب به شکل قابل توجه ای افزایش مییابد. از نتایج به دست آمده مشخص شد که در یک دسته نانولوله کربنی چهارتایی و در دماهای بین ۱۱0تا 2۱0کلوین مقدار جذب ثابت مانده ولی با کاهش دما از ۱۱0تا 50کلوین مقدار جذب به صورت خطی و با شیب قابل توجهای افزایش مییابد. همچنین، نتایج نشان میدهد که تغییرات فشار با دما به صورت خطی و از مرتبه اول است.https://nanomeghyas.ir/article_46371_1bdae5044104b0d434d656f141bf33e1.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320Fabrication of Ethanol Detection Electrochemical Biosensor
Using Modified Platinum Electrodeساخت زیست حسگر الکتروشیمیایی شناسایی اتانول با استفاده از الکترود پلاتین اصلاح شده516146339FAسمیرا خالق پناهگروه بیوتکنولوژی، دانشکدهی مهندسی شیمی، دانشگاه صنعتی نوشیروانی بابل، بابل، مازندرانمصطفی رحیم نژادگروه بیوتکنولوژی، دانشکدهی مهندسی شیمی، دانشگاه صنعتی نوشیروانی بابل، بابل، مازندرانافشین فرحبخشدانشکده ی مهندسی شیمی، دانشگاه آزاد اسلامی قوچان، قوچان، خراسان رضویرزان زختارهگروه بیوتکنولوژی، دانشکدهی مهندسی شیمی، دانشگاه صنعتی نوشیروانی بابل، بابل، مازندرانJournal Article20201018In this research, alcohol oxidase was immobilized at platinum electrode surface using chitosan to design an accurate and sensitive electrochemical biosensor for detection and measurement of ethanol in liquid phase. Amperometric studies were carried out in 0.1 M phosphate buffer solution containing ethanol. According<br />to the obtained results, the optimal conditions for biosensor operation were acquired at the temperature of 35 °C and pH 8. In order to improve the biosensor performance, gold nanoparticles were used in its construction and the comparison of obtained results from designed biosensor before and after adding these nanoparticles showed four-fold enhancement in current intensity produced by ethanol oxidation. The linear range of the gold nanoparticles modified biosensor, its Michaelis-Menten constant value, and its sensitivity were calculated to be 0.016-2.66 mM, 1 mM, and 2 µA/ mM cm2 ,respectively.در این پژوهش، آنزیم الکل اکسیداز با استفاده از کیتوسان در سطح الکترود پلاتین تثبیت شد تا یک زیست حسگر الکتروشیمیایی دقیق و حساس برای شناسایی و اندازه گیری اتانول در فاز مایع طراحی شود. مطالعات آمپرومتری در محلول بافر فسفات M 1/0 حاوی اتانول انجام شد. باتوجه به نتایج به دست آمده، شرایط بهینه برای عملکرد زیست حسگر در دمای °C 35 و pH برابر با 8 حاصل شد. برای بهبود عملکرد زیست حسگر از نانوذرات طلا در ساخت آن استفاده شد و مقایسه ی نتایج حاصل از زیست حسگر قبل و بعد از افزودن این نانوذرات، افزایش چهار برابری در شدت جریان تولید شده از اکسایش اتانول را نشان داد. محدوده ی خطی زیست حسگر اصلاح شده با نانوذرات طلا، ثابت میکائیلیس- منتن و حساسیت آن نیز به ترتیب برابر با mM 0/016-2/66، mM 1 و µA/ mM cm2 2 محاسبه شدند.<br /><br /><br />https://nanomeghyas.ir/article_46339_3f3b3f5d9a118a67bf648c61bacb3700.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320Effect of doping Chromiumon Electronic and optical properties of ZnS nanosheetتاثیر جایگزیدگی اتم کروم بر ویژگی الکترونیکی و نوری نانوصفحه روی سولفید708146384FAمحمود جعفریدانشکده فیزیک، دانشگاه صنعتی خواجه نصیر الدین طوسی، تهران0000-0001-9706-6572خدیجه علوانیدانشکده فیزیک، دانشگاه صنعتی خواجه نصیر الدین طوسی، تهرانJournal Article20201022Electronic and optical properties of the pure and Cr-doped ZnS nanosheets have been studied via adopting a plane-wave pseudopotential approach at the DFT-PBE level of theory. It is found that adding Cr atoms as the impurity decreases the band gap down to 1.5 eV and gives rise to half-metallic characteristics. Moreover, values of the dielectric function and the extinction coefficient of the doped monolayer decrease compared to the pure one, leading to some peaks in the visible range. The loss function also takes lower values due to doping and makes the plasmon peaks shift to lower energy range. However, the refractive index has an increasing trend at low energies so that the doped nanosheet could be considered as a high-refractive index material. Increase in the reflective coefficient also indicates the higher metallic feature of the doped monolayer compared to the pure one. Furthermore, the optical reflective and the extinction coefficients vanish for values larger than 13 and 21 eV, respectively. Our results could be of great importance for improving the performance of electronic and optical devices.در مقالهی پیش رو به بررسی خواص الکترونیکی و اپتیکی نانوصفحههای خالص روی سولفید ZnSو آلاییدهی Cr-ZnS، با استفاده از بستهی محاسباتی کوانتوم اسپرسو و بکارگیری تقریب GGA- PBE در چارچوب نظریهی تابعی چگالی پرداختهایم و در حل محاسبات نیز، از روش شبهپتانسیل و بسط تابع موج الکترونهای ظرفیت برحسب امواج تخت بهره گرفتهایم. بررسیها حاکی از آن است که افزودن اتم کروم به عنوان ناخالصی، منجر به کاهش گاف انرژی نانوصفحه به 5/1 الکترون ولت و پیدایش خواص نیمه فلزی میشود، همچنین باعث کاهش مقدار تابع دی الکتریک و ضریب خاموشی شده و پیکهایی در ناحیهی مرئی برای هر دو نمودار ظاهر میشود؛ مقدار تابع اتلاف نیز در ترکیب آلاییده به کروم کاهش مییابد و باعث جابجایی پیکهای پلاسمونی به انرژیهای کمتر میگردد، علاوه بر این با افزودن کروم ضریب شکست در انرژیهای پایین افزایش مییابد، بطوریکه میتوان آن را جز مواد با ضریب شکست بالا دانست. افزایش ضریب بازتابندگی نیز نشان از فلزیتر شدن خواص ترکیب ناخالص دارد. ضریب بازتابندگی اپتیکی بعد از 13 الکترون ولت و ضریب خاموشی بعد از 21 الکترون ولت به طورکلی صفر میشوند؛ با در نظر داشتن نتایج بدست آمده میتوان طراحی و ساخت ابزارهای الکترونیکی و اپتیکی را بهبود بخشید.https://nanomeghyas.ir/article_46384_5d5e31290b1323e0335aecf1786f9e45.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320Theoretical study on the effect of source-to-substrate distance
on copper thin film deposited by thermal evaporation
techniqueبررسی نظری تأثیر فاصله چشمه تا زیرلایه بر لایه نشانی مس به روش تبخیر حرارتی828946397FAجواد علی پور زردکوهیدانشکده فیزیک، دانشگاه سمنان، سمنانفاطمه شریعتمدار طهرانیدانشکده فیزیک، دانشگاه سمنان، سمنانمریم علیاننژادیدانشکده فیزیک، دانشگاه سمنان، سمنانJournal Article20201025<span class="fontstyle0">Copper thin films are widely used in security sensors, medical sensors, solar panels, mode locked laser, cancer treatment, and so on. Thermal evaporation is a common technique for deposition of copper thin<br />films. The distance between the copper source and the substrate is an important parameter that has not been investigated yet. Therefore, the effect of this parameter on the process of copper thin film deposition by thermal evaporation is investigated theoretically in this paper. The results showed that the copper vapor pressure on the substrate surface, the deposition rate and the thickness of the thin layer decreased with increasing this distance, whereas the uniformity of the film thickness improved with increasing the distance. The deposition rate decreased from 5.57nm/s to 1.12 nm/s and the thickness uniformity increases from 56 nm to 120 nm with increasing distance from 13 cm to 33 cm. Also, the dependence of thickness uniformity and deposition rate on the source-to-substrate distance was presented to select the appropriate distance according to the application of the thin layer.<br /></span>لایه های نازک مس به طور گسترده در حسگرهای امنیتی، حسگرهای پزشکی، صفحات خورشیدی، لیزرهای قفل شده مد، درمان سرطان و .... کاربرد دارند. روش تبخیر حرارتی روش مناسبی برای ایجاد لایه های نازک مس است. فاصله بین چشمه مس و زیرلایه پارامتر مهمی است که تاکنون مورد بررسی قرار نگرفته است. بنابراین، در این مقاله تأثیر این کمیت بر فرایند ایجاد لایه نازک مس با روش تبخیر حرارتی به صورت نظری مورد بررسی قرار گرفته است. نتایج نشان داد که فشار بخار مس بر سطح<br />زیرلایه، نرخ لایه نشانی و ضخامت لایه نازک با افزایش این فاصله کاهش مییابد. در حالیکه مقدار یکنواختی ضخامت لایه نازک با افزایش این فاصله بهبود می یابد. با افزایش فاصله از ۱۳cmتا ۳۳cmنرخ لایه نشانی از 5/57nm/sتا ۱/۱2nm/sکاهش و پهنای تابع ضخامت لایه از 56nmتا ۱20nmافزایش می یابد. همچنین، تابع وابستگی پهنای ضخامت و نرخ لایه نشانی لایه نازک به فاصله چشمه تا سطح زیرلایه ارائه شده است تا فاصله مناسب با توجه به کاربرد لایه نازک انتخاب شود.https://nanomeghyas.ir/article_46397_2183e66bbd764fec277f73be7770ed35.pdfانجمن نانوفناوری ایراننانومقیاس2423-56287120200320Investigation of Structural and biological properties of
chitosan/nano-flourhydroxyapatite compositeبررسی ویژگی ساختاری و زیستی چندسازه کیتوسان/نانوفلوئورهیدروکسیآپاتیت909746387FAزهرا انصاریگروه مهندسی مواد، دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزدمهدی کلانترگروه مهندسی مواد، دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزدمهشید خرازیهای اصفهانیدانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهانJournal Article20201022In this study CS/nFHA composite at different compositions 90/10-50/50-40/60 w/w synthesized by sol-gel method. This nanocomposite is used as biocompatible materials for bone tissue engineering. The appropriate amounts of P/F solution was added dropwise to the Ca solution to yield a stoichiometric ratio of Ca/P1.67 and P/F6. The Phase analysis, powder morphology, the bonds configuration, functional groups, thermal behaviors and biological assesment of the sinthesized samples were studied by X-ray Diffraction XRD, Scanning Electron Microscopy SEM, Fourier transform infrared spectroscopy FTIR, Thermo-gravimetric and Differential Thermal Analysis TG-DTA and Cell culture method respectively. The XRD and SEM results showed that increasing chitosan content in the composite decreased the average FHA nanocrystallite size. The results of FTIR showed the presence of flour-hydroxyapatite phase. The result of Cell culture indicates that the addition of 10 w/w FHA has a positive effect on the cell proliferation.در این پژوهش کامپوزیت کیتوسان/نانوفلوئورهیدروکسی آپاتیت با 10و 50 و 60 درصد وزنی فلوئور هیدروکسی آپاتیت به روش سلژل سنتز شد. این نانوکامپوزیت قابلیت استفاده بالقوه در مهندسی بافت استخوان را دارد. برای دستیابی به مقدار استوکیومتری 67/1Ca/P و 6P/F محلول فسفر/فلوئور به صورت قطره قطره به محلول کلسیم اضافه شد. آنالیز فازی، ریخت شناسی پودر، نوع پیوندها، گروههای عاملی، رفتار حرارتی و ارزیابی بیولوژیکی نمونههای سنتز شده به ترتیب توسط تفرق اشعه ایکس XRD، میکروسکوپ الکترونی روبشی SEM، آزمون طیف نگاری مادون قرمز FTIR، آنالیز حرارتی TG-DTA و آزمایش کشت سلولی مورد مطالعه قرار گرفت. نتایج پراش پرتو ایکس و میکروسکوپ الکترونی روبشی نشان میدهد که اندازه متوسط نانوبلورک FHA با افزایش مقدار کیتوسان در کامپوزیت کاهش مییابد. نتایج طیف سنجی مادون قرمز نشان دهنده ایجاد فاز فلوئورهیدروکسی آپاتیت بود. بر اساس نتایج کشت سلولی نیز اضافه کردن فلوئورهیدروکسی آپاتیت به میزان 10 درصد وزنی اثر مثبتی در تکثیر سلولها داشته است.https://nanomeghyas.ir/article_46387_720740dde3c0b05c3fe007c49595c2b2.pdf