@article { author = {Seyyedi, S. M.S. and Roshankar, M. and Pourfath, M.}, title = {A First-Principle Study of Phosphorene-based Gas Sensors}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {295-303}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {Two-dimensional materials have been the focus of research activities over the past decade.Their interesting and unique properties render them as excellent candidates for future electronic,optoelectronic, sensing, and bio applications. For gas sensing it is essential to maximize the ratio of thesurface to volume of the sensor, which is the case for two-dimensional materials. This work presents acomprehensive study on adsorption properties of H2S, NH3, CO, and NO on phosphorene, by employing firstprinciple calculations. The optimized atomic sites, directions and the associated adsorption mechanisms are carefully analyzed. Transfer of charge between the gas molecule and the layer modifies the layer’s resistance. By evaluating the resistance variation, the concentration of gas molecules can be determined. The results indicate that nitrogen-based molecules especially NO, show the highest sensitivity among the studied gases. In addition, strain effects on sensor characteristics and adsorption behavior are investigated. The optimal locations for the absorption of the gases and the mechanism of absorption energy under various strain conditions are analyzed. The results indicate that sensitivity increases with strain and significantly improves the selectivity of the sensor. The results show that both strained and unstrained phosphorene are suitable candidates for sensitive gas sensing applications.}, keywords = {Two-dimensional materials,Phosphorene,Gas sensor,Density Functional Theory Calculations,Strain}, title_fa = {مطالعه حسگر گازی مبتنی بر فسفرین با استفاده از اصول اولیه}, abstract_fa = {در این پژوهش، با استفاده از محاسبات مبتنی بر نظریه تابع چگالی، جذب مولکولهای گاز ،NH، CO3 ،H2SوNOبر روی فسفرین مورد مطالعه قرار میگیرد. مکانهای بهینهی جذب هر یک از گازها و مکانیزم حس گازها توسطلایهی دو بعدی شناسایی می شود. هرچه انتقال بار بیشتری بین مولکول و فسفرین اتفاق بیفتد، مقاومت لایه نیز تغییربیشتری می کند و لذا با محاسبهی تغییرات مقاومت می توان گازها را تشخیص داد و غلظت آنها را بدست آورد. نتایجنشان می دهند که فسفرین بیشترین حساسیت را به گازهای مبتنی بر اتم Nو بخصوص مولکول گاز NOدارد. بمنظوربهبود عملکرد حسگر فسفرین، به مطالعهی نقش کرنش در عملکرد حسگری آن پرداخته شد. مکانهای بهینهی جذبهر یک از گازها در کرنشهای مختلف بدست آمد و مکانیزم تغییرات انرژی جذب گازها در اثر اعمال کرنش شناساییشد. نتایج تاثیر اعمال کرنش نشان میدهند که اعمال کرنش به تکلایه، قابلیت تفکیک گازها را بهبود می بخشد. درنهایت می توان گفت که عملکرد حسگر گازی فسفرین بدون کرنش و همچنین تحت کرنش قابل قبول است و تواناییبالقوهای در تفکیک گازها دارد}, keywords_fa = {مواد دوبعدی,فسفرین,حسگر گازی,انتقال بار,کرنش}, url = {https://nanomeghyas.ir/article_46519.html}, eprint = {https://nanomeghyas.ir/article_46519_068265583ee89d6cb28a8fb30490049f.pdf} } @article { author = {Ghasemi, A. and Arab, A.}, title = {Investigation of NO Adsorption on the Rh-Cu Nanoclusters Supported on Graphene Nano Sheet by Density Functional Theory}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {305-318}, year = {2021}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {The stable structures and different adsorption modes of RhxCu4-xx0-4 nanoclusters on the graphene nano sheet were studied by DFT using B3PW91 functional. Then, the adsorption of NO on the most stable structure of Graphene-Cluster was investigated. The results showed that adsorption of bimetallic Rh-Cu clusters on the graphene nano sheet was energetically more favored compared to the pure Cu4 cluster. Among bimetallic clusters, adsorption of Rh3Cu on the graphene nano sheet was energetically more favored compared to the pure Rh4 cluster. For all the studied adsorption modes of NO on the clusters, it was observed that adsorption from the nitrogen end was more favored than adsorption from the oxygen end. Also. Adsorption of NO on Rh atoms was more favored than adsorption on Cu atoms. Adsorption energies of NO were obtained in the -1.62 eV to -2.63 eV range indicating the strong interaction between NO and cluster. With increasing the amount of Rh in the cluster, the adsorption energy of NO increased in a regular trend and the maximum adsorption energy}, keywords = {DFT,Rh-Cu nanoclusters,Graphene nano sheet,Adsorption,Nitrogen monoxide}, title_fa = {بررسی جذب نیتروژن مونو اکسید روی نانو کلاسترهای Rh-Cuنشانده شده بر بستر نانو صفحه گرافن با استفاده از نظریه تابعی دانسیته}, abstract_fa = {ساختارهای پایدار و حالت های مختلف جذب نانوکلاسترهای RhxCu4-xx0-4 بر بستر نانو صفحه گرافن با بکارگیری نظریه تابعی دانسیته، با استفاده از تابعی هیبریدی B3PW91 مورد مطالعه قرار گرفت. سپس جذب مولکول NOروی پایدارترین ساختارهای گرافن – کلاستر بررسی شد. نتایج نشان داد که جذب کلاسترهای ترکیبی Rh-Cu روی گرافن نسبت به کلاستر خالص مس Cu4 از نظر انرژی مطلوب تر است. در حالیکه از بین کلاسترهای ترکیبی، فقط جذب کلاستر Rh3Cu روی گرافن نسبت به کلاستر خالص رودیمRh4 از نظر انرژی مطلوب تر است. در جذب NOروی همه کلاسترها، مشاهده گردید که جذب از طرف اتم نیتروژن مطلوبتر از جذب از طرف اتم اکسیژن می باشد. همچنین جذب روی اتم های رودیم مطلوبتر از جذب روی اتم های مس است. مقادیر انرژی جذبNO در محدوده -1.62 eVتا -2.63 eV بدست آمد که نشان دهنده برهمکنش قوی بین کلاستر و NO می باشد. با افزایش مقدار Rh در کلاستر، مقدار انرژی جذب NO افزایش یافته است و بیشترین مقدار انرژی جذب مربوط به کلاستر Rh4 می باشد. طول پیوند N-Oبعد از جذب روی کلاسترهای خالصRh4 وCu4 نسبت به کلاسترهای ترکیبی Rh-Cuبه مقدار بیشتری افزایش یافته است که نشان می دهد کلاسترهای خالصRh4 وCu4 نسبت به کلاسترهای ترکیبی Rh-Cuتمایل بیشتری به تفکیک NOدارند. همچنین از بین کلاسترهای ترکیبی، کلاستر Rh3Cu تمایل بیشتری به تفکیکNO دارد. بار منفی NBO روی مولکولNO بعد از جذب روی کلاسترها که نشان دهنده انتقال الکترون از کلاستر به اوربیتالهایπ 2 مولکول NO است نیز تایید کننده افزایش احتمال تفکیک پیوند N-Oمی باشد.}, keywords_fa = {نظریه تابعی دانسیته,نانو کلاسترهای Rh-Cu,نانو صفحه گرافن,جذب سطحی,نیتروژن مونواکسید}, url = {https://nanomeghyas.ir/article_46521.html}, eprint = {https://nanomeghyas.ir/article_46521_e36ef74b9d4cbf03672d9952cca0aef8.pdf} } @article { author = {Nouri Mahtaj, H. and Jarchi, S. and Keshtkar, A.}, title = {Absorption Enhancement of Spherical Nano-Shells Using Graphene Substrate}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {319-327}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In ‌this article the effect of ‌using graphene substrate on absorption of spherical metallic gold Au and silver Ag nano shells has been investigated. In this study, for each one of two mentioned metallic nano shells, three kind of different dielectrics: air, silicon si and alumina Al_2 O_3, have been considered. Investigation, simulation and comparison of these nano shells have been done in two sizes of‌ structure‌ overall radius‌ equal to 25 nm and 50 nm. According to performed studies on results, it is observed that utilizing graphene substrate under metallic nano shells increases amplitude of absorption. In this case, some parameters such as, thickness of metallic nano shells, thickness of graphene substrate, material of used dielectric, overall radius of structure and also material of surrounding medium are very effective on improving and increasing amplitude of absorption cross section ACS. So, to have maximum absorption, a trade of should be exist among mentioned parameters.}, keywords = {Metallic nano shell,graphene substrate,absorption cross section (ACS)}, title_fa = {بهبود جذب در نانو پوسته های فلزی کروی با استفاده از زیرلایه گرافنی}, abstract_fa = {در این مقاله تأثیر استفاده از زیرلایه گرافنی بر روی جذب نانوپوستههای فلزی کروی طلا Au و نقره Ag مورد بررسی قرار گرفته است. در این بررسی ها برای هر کدام از دو پوسته فلزی مذکور به طور جداگانه سه نوع هسته دی‌الکتریک متفاوتِ هوا Air‌، سیلیکون Si و آلومینا Al_"2" O_"3" در نظر گرفته شده‌ است. بررسی‌، شبیه ‌سازی‌ و مقایسه این نانو پوسته‌ها برای دو اندازه‌‌ی شعاع کلّ ساختار‌ برابر با 25 ‌‌نانو‌متر و 50 نانومتر، انجام گرفته است. در مطالعات انجام شده بر روی نتایج، مشاهده می‌شود حضور زیرلایه گرافنی در زیر نانو‌پوسته‌های فلزی بر میزان دامنه جذب آنها می‌افزاید. در این بین عواملی مانند اندازه ضخامت پوسته‌ی فلزیِ نانو‌پوسته، اندازه ضخامت زیرلایه گرافنی، جنس دی‌الکتریک مورد استفاده، اندازه شعاع کلّی ساختار و همچنین جنس محیط پیرامون، به شدّت در میزان بهبود و افزایش در دامنه نمودار برش مقطع عرضی جذب ACS ساختار، مؤثّر هستند و برای داشتن بیشینه‌ی جذب، باید مصالحه‌ای بین این کمیّت‌ها وجود داشته باشد.}, keywords_fa = {نانو‌ پوسته فلزی,زیرلایه ی گرافنی,برش مقطع عرضی جذب}, url = {https://nanomeghyas.ir/article_46523.html}, eprint = {https://nanomeghyas.ir/article_46523_5918fafebb0076ad2ea4fea82f56d317.pdf} } @article { author = {Nadri, F. and Mardaani, M. and Rabani, H.}, title = {Transmission Coefficient of a Lengthy Ladder-Like Graphene Nanoribbin Connected to Some Additional Benzene Rings}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {329-334}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this paper, we consider the electronic transport of a ladder-like nanoribbon which is connected to some benzene rings in its small part by using Green’s function method and tight-binding approach. For this purpose, we first rewrite the Hamiltonian of the system in a way the Hamiltonian of the ideal parts converts to the Hamiltonian of two simple chains. The results show that the existence of extra rings makes conductance decreasing and creation of anti-resonance deeps in the transmission coefficient spectra in some cases. The electronic conductance of different configurations which are constructed with position variation of extra rings is studied and compared. Particularly, the value of the transmission coefficient in the Fermi energy for different configurations is taken into the investigation.}, keywords = {Electronic conductance,Green’s function,tight-binding,Graphene nanoribbon,Benzene ring}, title_fa = {ضریب عبور یک نانونوار گرافن نردبانی شکل بلند متصل به چند بنزن اضافی}, abstract_fa = {در این مقاله با استفاده از روش تابع گرین و در رهیافت تنگابست به بررسی ترابرد الکترونی یک نانونوار نردبانی شکل نامتناهی که چند حلقه بنزن در قسمت کوچکی از آن اضافه شده است، می پردازیم. برای این منظور ابتدا هامیلتونی سامانه مورد نظر را با استفاده از یک تبدیل متعامد به گونه ای تغییر می دهیم که هامیلتونی قسمت های ایده آل آن معادل هامیلتونی دو زنجیره ی ساده باشد. نتایج نشان می دهد که حضور حلقه های اضافی، باعث کاهش رسانش شده و در بعضی موارد، دره های ضد تشدیدی در طیف ضریب عبور الکترونی ایجاد می کند. رسانش الکترونی پیکربندی های مختلف که از جابجایی مکان حلقه های اضافی شکل می گیرند، مطالعه و مقایسه شده است. بخصوص مقدار ضریب عبور در انرژی فرمی در پیکربندی های متفاوت را مورد توجه قرار داده ایم.}, keywords_fa = {رسانش الکترونی,تابع گرین,تنگابست,نانونوار گرافن,حلقه بنزنی}, url = {https://nanomeghyas.ir/article_46526.html}, eprint = {https://nanomeghyas.ir/article_46526_0339097e5fb97c69e30ca3d44fd1c2fe.pdf} } @article { author = {Tohidifar, M. and Malekfar, R.}, title = {Sol-Gel Preparation, Characterization and Electromagnetic Interference Shielding of MWCNTBaTiO3/Silica Nanocomposite}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {335-346}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {This paper investigated the preparation of a multi-walled carbon nanotube MWCNT-barium titanate/silica nanocomposite using a sol-gel technique. The synthesis was conducted using different amounts of MWCNT 2, 4, 6 and 8 wt. Scanning electron microscopy SEM, X-ray diffraction XRD, Fourier transform infrared spectroscopy FTIR, Simultaneous thermal analysis STA, Dielectric behavior and Electromagnetic interference shielding effectiveness EMI SE were used to characterize the as-synthesized specimens. It was found that the sol-gel process provided the nanocomposite with higher EMI SE value compared to the same nanocomposite prepared by the other methods. This is resulted due to a good mixing and homogeneous distribution of MWCNTs and other composite constituents. Results also indicated that the grain size of 98 nm for the nanocomposite prepared with 8 wt MWCNT and sintered at 750°C was concluded.}, keywords = {Nanocomposite,Sol-gel,Carbon Nanotube,dielectric properties}, title_fa = {تهیه و مشخصه یابی نانوکامپوزیت نانولوله کربنی- تیتانات باریم/سیلیکا به روش سل- ژل و بررسی خواص حفاظتی آن در برابر امواج الکترومغناطیس}, abstract_fa = {در این پژوهش روش سل-ژل جهت سنتز نانوکامپوزیت نانولوله کربنی- تیتانات باریم/سیلیکا به کار گرفته شد. فرآیند سنتز با استفاده از مقادیر مختلفMWCNT 2، 4، 6 و 8 درصد وزنی انجام شد. میکروسکوپ الکترونی روبشی SEM، تفرق اشعه ایکس XRD، طیف سنجی مادون قرمز تبدیل فوریه FTIR، آنالیز حرارتی همزمان STA، رفتار دی الکتریک و خواص حفاظتی تداخلی امواج الکترومغناطیس EMI SE جهت مشخصه یابی و بررسی خواص نانوکامپوزیتها مورد استفاده قرار گرفتند. نتایج نشان داد که EMI SE و نفوذپذیری مختلط نانوکامپوزیت های سنتز شده در این پژوهش نسبت به نمونه مشابه که از روش های دیگر تهیه شده، بهبود یافته که ناشی از اختلاط و توزیع همگن نانولوله ها در بین ذرات است. همچنین مشخص شد که نمونه سنتز شده با 8 درصد وزنی MWCNT که در C°750 سینتر شده دارای اندازه دانه حدود 97 نانومتر می باشد.}, keywords_fa = {نانوکامپوزیت,سل- ژل,نانولوله کربنی,خواص دی الکتریک}, url = {https://nanomeghyas.ir/article_46528.html}, eprint = {https://nanomeghyas.ir/article_46528_e3d895bf4b9e889c974a4649c896a097.pdf} } @article { author = {Sheidaei, M. and Balanejad Gasemsoltanlu, A. and Beiraghi, A.}, title = {Preparation of Clinoptilolite Nanostructure from this Zeolite ore and its Application in Copper Ions Removal from Water}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {347-353}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this work, natural clinoptilolite nanaostructures were prepared from natural zeolite and used to remove Cu2 cation from polluted water. In the first section the natural clinoptilolite particles were converted to nanostructures using a ball mill. The natural clinoptilolite and prepared nanostructures samples were characterized by SEM, XRD, and BET. The SEM images approved the development of clinoptilolite nanostructures. The result obtained from BET analysis indicated the increase pore volume of clinoptilolite nanostructures related to the clinoptilolite microparticles. In the second part of this work, the nanostructures were used as adsorbent for removal of Cu2 cation from polluted water. Effect of initial pH of solution, adsorbent dosage and contact time on the Cu2 removal efficiency was investigated, where the 6, 1.2 g/L and 6 were determined as optimum conditions, respectively. Isotherm and kinetics of the adsorption process were analyzed. The equilibrium data were fitted well to the Langmuir isotherm model and pseudo-second-order kinetic model.}, keywords = {Mechanical method,Natural Clinoptilolite nanostructures,Copper (II) ions,Natural zeolite,Flame atomic absorption spectroscopy}, title_fa = {تهیه نانو ساختار کلینوپتیلولیت از سنگ معدن این زئولیت و استفاده از آن برای حذف آلاینده مس از آب}, abstract_fa = {در این کار پژوهشی نانوساختارهای کلینوپتیلولیت از سنگ معدن این زئولیت طبیعی تهیه و جهت حذف یون مس II از محلول‌ آبی آلوده به آن استفاده شد. در مرحله اول ذرات کلینوپتیلولیت طبیعی توسط دستگاه آسیاب گلوله‎ای به نانوساختارهای مربوطه تبدیل شدند. مشخصات این زئولیت طبیعی و نمونه‏های نانوساختار بدست آمده از آن با استفاده از SEM، BETو XRD بررسی شدند. تصویر SEM تولید نانو ساختارهای کلینوپتیلولیت را تایید کرد. داده‎های به‌دست‌آمده از آنالیز جذب-واجذبی نیتروژن حاکی از افزایش تخلخل نانوساختارهای کلینوپتیلولیت نسبت به میکروذرات سنگ معدن مربوطه بود. درقسمت دوم این پروژه از نانوساختارهای تهیه شده به‌عنوان جاذب در فرآیند حذف یون مس II از آب آلوده شده استفاده گردید. تأثیر عوامل محیطی مانند pH اولیه محلول، غلظت جاذب، غلظت آلاینده و زمان تماس بر راندمان حذف مس II از محلول بررسی گردید. همچنین مدل ایزوترمی و مدل سینتیکی فرآیند حذف مس مورد بررسی قرار گرفت که مدل لانگمویر تطابق بیشتری با فرآیند جذب سطحی مورد نظر داشت و فرآیند از مدل سینتیکی شبه درجه دوم پیروی کرد.}, keywords_fa = {روش مکانیکی,نانوساختارهای کلینوپتیلولیت,یون مس (II),زئولیت طبیعی,اسپکتروسکوپی جذب اتمی شعله ای}, url = {https://nanomeghyas.ir/article_46566.html}, eprint = {https://nanomeghyas.ir/article_46566_de5ab687863c71d6c4c4048d518829cf.pdf} } @article { author = {Shahi, Neda and Rahmati, A. and Iranmanesh, P.}, title = {Effect of Growth Condition on Charactristic of ZnO nanorods}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {355-368}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {One- dimensional well-aligned ZnO nanostructures nanorods array have been synthesized by low temperature method less than 120oC using seed layer. The effect of bath concentration and temperature, seed layer annealing and thickness was studied on nanorods density, diameter, height and their optical absorption. Post annealing of the synthesized nanorods causes to increase in crystalline qualityand perfected growth in c normal direction. The structure, morphology, chemical and optical, properties of ZnO NRs array were studied by X-ray diffractometery XRD, field emission-scanning electron microscope/energy dispersive X-ray spectroscopy FE-SEM/EDX and UV-Vis-near IR optical absorption spectroscopy,respectively. The height, mean diameter and density of trongly well-aliged ZnO NRs array are 190nm, 31-52nm and 290-413 rods/µm2 on ZnO seed layer, respectively. The annealing of ZnO NRs results in bandgap energy reduction to 3.19 eV in comparision to 3.29 eV for as-grown ZnO NRs. The increase in chemical bath temperature 110oC cause to random orientation in ZnO NRs and bandgap energy shrinkage. The annealing of seed layer in 200- 600oC decreases the densityas well decreases bandgap energy. The seedlayer thickness lowering decreases the ZnO NRs diameter and increases their density.}, keywords = {Thermal decomposition,Annealing,magnetron sputtering,well-aligned ZnO nanorods array}, title_fa = {تأثیر شرایط رشد بر آرایه نانومیله‌های همراستای ZnO}, abstract_fa = {در کار حاضر، نانوساختارهای یک بعدی همراستا یا نانومیله‌های ZnO به روش نهشت حمام شیمیایی در دماهای کمتر از oC120 به کمک لایه‌جوانه‌زنی در شرایط مختلف مانند دما و غلظت حمام، ضخامت لایه جوانه‌زنی و بازپخت آن رشد کرده‌اند. ویژگی‌های ساختاری، ریختی و شیمیایی، و اپتیکی آرایه نانومیله‌های ZnO به ترتیب به وسیله پراش سنجی پرتوX ، میکروسکوپ الکترونی روبشی- گسیل میدانی بهمراه طیف‌سنجی پرتو X با پاشندگی انرژی FE-SEM/EDX و طیف سنجی جذبی UV-Vis-near IR بررسی می‌شوند. عملیات حرارتی پس از سنتز نانومیله‌ها افزایش در کیفیت بلوری نانومیله‌های رشد یافته با جهت‌گیری ترجیحی عمودی C به دنبال دارد. ارتفاع، قطر میانگین و چگالی نانومیله‌های به شدت همراستا بر لایه جوانه‌زنی ZnO به ترتیب در حدود nm190، nm52-31 وrods/µm2413-290 می‌باشند. بازپخت نانومیله‌ها در دمای oC400 باعث کاهش انرژی گاف نواری از مقدار eV29/3 برای نانومیله‌ها بدو-رشد به مقدار eV19/3 می‌شود. افزایش دمای حمام شیمیایی تا oC110 باعث جهت‌گیری رندوم نانومیله‌ها و کاهش انرژی گاف نواری می‌شود. بازپخت لایه جوانه‌زنی در بازه دمایی oC600-200 باعث کاهش در ارتفاع نانومیله‌ها، افزایش در قطر متوسط و کاهش در تراکم و همینطور کاهش در انرژی گاف نواری می‌شود. کاهش در ضخامت لایه جوانه‌زنی باعث کاهش در قطر نانومیله‌ها و افزایش تراکم آن‌ها می‌شود.}, keywords_fa = {نانوساختار یک بعدیZnO,تجزیه گرمایی,بازپخت,لایه جوانه‌زنی ZnO,کندوپاش مگنترونی,آرایه نانومیله‌های همراستا}, url = {https://nanomeghyas.ir/article_46567.html}, eprint = {https://nanomeghyas.ir/article_46567_61e00e297cd9f91bde06a282f3fb1bc3.pdf} } @article { author = {Azim Araghi, M. E. and Mahmoudi, S.}, title = {Influence of Temperature and Frequency on Electrical Properties Nanocomposite Chloroindium Phthalocyanine-Polypyrrole}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {369-376}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this research work, the AC electrical properties of nanocomposite chloroindium phthalocyanine-polypyrrole were studied. Nanocomposites (ClInPc+%5 PPy) & (ClInPc+%15 PPy) & (ClInPc+%25 PPy) were synthesized and Subsequently sandwich devices (Al/ClInPc+PPy/Al) were prepared on pre-cleaned glass substrates, which were deposited in a high vacuum device of the electron-beam gun in the pressure of 10-5 mbar. Capacitance and Dissipation factor were measured in the range of 102-105 Hz frequency and 307-383 K temperatures. the capacitance and loss factor reduced by increasing the frequency and enhanced by increasing the temperatures. The AC electrical properties thin films of our materials are in good agreement with Goswami and Goswami model. The dependence of the electrical conductivity on the frequency is analyzed by the equation σ(ω) = AωS which is typical for charge transport. The dominance of each mechanism depends on the experimental conditions and the temperature and frequency intervals. In this present research, the conduction mechanism is specified with hopping models. furthermore, the activation energies of the device are achieved as a function of frequency. The surface morphology of the nanocomposite thin film was investigated by field emission scanning electron microscope (FESEM) images.}, keywords = {AC conductivity,Phthalocyanine,Polypyrrole,The conduction mechanism}, title_fa = {تاثیر دما و فرکانس بر خواص الکتریکی نانو کامپوزیت فتالوسیانین کلروایندیوم-پلی پیرول}, abstract_fa = {در این پژوهش خواص الکتریکی و ساختاری نانو کامپوزیت فتالوسیانین کلروایندیوم و پلی پیرول ClInPc ₊ Ppy بررسی شده است. در ابتدا نانوکامپوزیت در درصدهای 5 و 15 و 25 سنتز شد و سپس قطعات ساندویچی با استفاده از دستگاه لایه نشانی تبخیر باریکه الکترونی تحت خلا 5-10 میلی بار آماده شد. ظرفیت و عامل اتلاف این قطعات در بازه‌ی فرکانسی 105-100 هرتز و بازه‌ی دمایی383-308 کلوین اندازه گیری شده است که نشان می دهد ظرفیت و عامل اتلاف با افزایش فرکانس کاهش می یابند. وابستگی رسانندگی الکتریکی به فرکانس با رابطه σacω Aωs توضیح داده می شود که با توجه به این رابطه مکانیزم های رسانش حامل ها مشخص می شود. غالب بودن هر مکانیزم رسانش وابسته به شرایط آزمایش و بازه های دمایی و فرکانسی است، که در این تحقیق مکانیزم هوپینگ غالب است. انرژی فعال سازی برای انتقال الکترون ها برای سه درصد متفاوت کامپوزیت محاسبه شده که نشان می دهد انرژی فعال سازی با افزودن درصد پلیمر رسانا کاهش یافته است. وضعیت مورفولوژی سطح توسط میکروسکوپ الکترونی روبشی گسیل میدانی FESEM مورد بررسی قرار گرفته است.}, keywords_fa = {خواص الکتریکی AC,فتالوسیانین,پلی پیرول,مکانیزم رسانش}, url = {https://nanomeghyas.ir/article_46568.html}, eprint = {https://nanomeghyas.ir/article_46568_2e4d7e5991eac09c1fbfdd584bcbe836.pdf} } @article { author = {Heidari, E.}, title = {Plasmonic Nano-pixels for Security Applications}, journal = {Nanoscale}, volume = {5}, number = {4}, pages = {377-381}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this paper, we developed full-color nano-pixels with a nanoscale resolution based on plasmonic nano-slits. For this purpose, we combine electron beam lithography and dry etching nanotechnologies to nanofabricate plasmonic nano-slits behaving as polarization-dependent nano-pixels. Arrays of this nano-pixels with different lengths and periods are used for generation of different colors and consequently storing information. In addition, finite-difference time domain method is used to investigate the selection rule and the electric field distributions in these plasmonic nano-slits and compared them with the experimental results. It is revealed that the electric field distribution is perpendicular to the polarization of the excitation white light and the concentration is on the sharp edges close to the center of the nano-slits on the top and the bottom sides. These plasmonic surfaces are promising for anti-counterfeiting applications due to their nanoscale details, lack of the public access to the fabrication equipment and fabrication expertise. Therefore, these plasmonic surfaces have a great potential to be used for development of the next generation of credit cards, security labels and bank notes.}, keywords = {Nano-pixels,Plasmonic,Security labels,Nanolithography}, title_fa = {استفاده از نانوپیکسل های پلاسمونیکی برای کاربردهای امنیتی}, abstract_fa = {در این مقاله از نانوروزنه های پلاسمونیکی برای ساخت پیکسل های تمام رنگی با رزولوشن نانومتری استفاده شده است. در این فناوری با ترکیب نانولیتوگرافی باریکه الکترونی و زدایش خشک امکان ایجاد نانوروزنه های پلاسمونیکی در لایه های نازک آلومینیوم فراهم گشته که بعنوان نانوپیکسل های رنگی وابسته به قطبش عمل می کنند. با ترکیب آرایه ای از این نانوروزنه ها با ابعاد و توالی مختلف نانوپیکسل های تمام رنگی که قابلیت ذخیره اطلاعات را دارند ایجاد شد. علاوه بر این، با استفاده از تفاضل محدود حوزه زمان توزیع میدان الکتریکی و قانون انتخاب در این نانوروزنه ها مورد بررسی قرار گرفت و با نتایج تجربی مقایسه شد. به دلیل ابعاد نانومتری سطوح ساخته شده و عدم دسترسی عمومی تجهیزات ساخت امکان جعل آنها وجود ندارد و برای کاربردهایی امنیتی همچون ساخت کارت های اعتباری و پول مناسب هستند.}, keywords_fa = {نانوپیکسل,پلاسمونیک,برچسب امنیتی,نانولیتوگرافی}, url = {https://nanomeghyas.ir/article_46569.html}, eprint = {https://nanomeghyas.ir/article_46569_b8fce51444fc943f2e56e0e3c440bd75.pdf} }