@article { author = {roushani, M. and Shokri, M. and Farokhi, S.}, title = {Synthesis ofThiolatedGraphene Quantum Dots andTheir Application in the Measurement ofMercury Ions}, journal = {Nanoscale}, volume = {6}, number = {1}, pages = {1-10}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this work, at first thiolated graphene quantum dot tio-GQD was synthesized. Characterization of the synthesized compound was caried out by the use of infrared spectroscopy. The obtained results confirm that the thiolated graphene quantum dot was succesfully synthesized. The size of these nanoparticles was investigated by TEM. On the base of achieved images, the average dimeters of nanoparticles were estimated about 50 nm. The oxidized GQD were thiol functionalized with cysteamine. In the following the prepared nanoparticles were applied for the determination of trace amount of mercury. The limit of detection was obtained 0.160 μM and linear concentration rang 0.5 µM to 1 mM. Finaly the synthesized thiolated graphene quantum dot was applied for the determination of mercury in the real samples and selectivity with satisfactory results  }, keywords = {Mercury ion,Thiolated graphene quantum dots,Fluorescence emission,Excitation wavelength}, title_fa = {سنتز نقاط کوانتومی گرافن تیول‌دار و کاربرد آن در اندازه‌گیری یون جیوه}, abstract_fa = {در این پروژه ابتدا نقاط کوانتومی گرافن تیول‌دار سنتز شد. شناسایی ماده سنتز شده با استفاده از طیف‌سنجی مادون قرمز تبدیل فوریه انجام شد و مشخص شد که نقاط کوانتومی با موفقیت سنتز شده است. در ادامه با استفاده از دستگاه میکروسکوپ الکترونی عبوری اندازه نانوذرات سنتز شده مورد ارزیابی قرار گرفت؛ نتایج نشان داد که اندازه نانوذرات زیر 50 نانومتر می‌باشد. در این مطالعه، تیول‌دار شدن نقاط کوانتومی گرافن به وسیله سیستامین انجام شد. نتایج به دست آمده نشان داد به کمک نقاط کوانتومی گرافن تیول‌دار، مقادیر بسیار ناچیز جیوه قابل شناسایی می‌باشد. حد تشخیص روش µM 16/0 به دست آمد و محدوده خطی غلظت µM 5/0 تا mM 0/1 تعیین شد. سرانجام کاربرد این نانو ذرات برای اندازه‌گیری جیوه در نمونه‌های حقیقی و گزینش‌پذیری روش با نتایج رضایت‌بخشی مورد مطالعه قرار گرفت.}, keywords_fa = {یون جیوه,نقاط کوانتومی گرافن تیول‌دار,نشر نورتابی,طول موج تحریکی}, url = {https://nanomeghyas.ir/article_46461.html}, eprint = {https://nanomeghyas.ir/article_46461_9b5827dc2d9b0395bb9b12b4560eb6eb.pdf} } @article { author = {Jafari, M. and Eshghi, H.}, title = {An Investigation on the Physical Properties and Photoconductivity Effect of CuO Nanostructures Prepared by Thermal Oxidation Route}, journal = {Nanoscale}, volume = {6}, number = {1}, pages = {11-18}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {Cupric oxide CuO thin films were synthesized on ITO substrate using thermal oxidation route. Samples were made using a Cu-layer deposited by PVD method in two cases: in the absence and presence of an adhesive oxide layer on the substrate. Samples were characterized by FESEM images, XRD and UV-Vis. spectra. We found that while the surface of the sample without adhesive layer is covered by nanograins, but sample with the adhesive layer is covered by rough nano-grains contained of very fine grains, about 30 nm or less. The XRD spectra of the samples indicated a polycrystalline structure in monoclinic phase with the main orientations of 111 and 1 ̅11. Among these samples, one with an adhesive layer has a better physical conditions i.e. bigger crystallite sizes, smaller band gap and higher optical absorbance. Finally, photoconductivity effect in metal-semiconductor-metal MSM structure was investigated using a red LED lamp.  }, keywords = {Cupric oxide (CuO),Thermal oxidation,nanostructure,Photoconductivity effect}, title_fa = {بررسی خواص فیزیکی و اثر فوتورسانایی نانوساختارهای CuO تهیه شده به روش اکسایش حرارتی}, abstract_fa = {لایه های نازک اکسید مس بر روی زیرلایه ITO با استفاده از روش اکسایش حرارتی تهیه شدند. نمونه ها توسط لایه‌ای از مس به روش رونشانی بخار فیزیکی PVD در دو حالت ساخته شدند: در غیاب و حضور لایه چسبنده بر روی زیرلایه. نمونه‌ها با استفاده از تصاویر FESEM، طیف‌سنجی‌های XRD و UV-Vis. مورد مشخصه-یابی قرار گرفتند. دریافتیم در حالی که سطح نمونه ی بدون لایه چسبنده از دانه‌هایی نانومتری پوشیده شده، اما نمونه ی دیگر با لایه ی چسبنده از دانه‌هایی متخلخل و برجسته همراه با ریزدانه‌هایی در حدود nm30 و یا کوچکتر پوشیده شده است. طیف‌های XRD نمونه‌ها حاکی از ساختار بس‌بلوری در فاز مونوکلینیک با جهتگیری‌های ترجیحی 111 و "" 1 ̅"11" می‌باشد. در بین این نمونه‌ها، نمونه ی با لایه چسبنده از شرایط فیزیکی مناسب‌تری ابعاد بلورکی بزرگتر، گاف نواری کوچکتر و جذب نوری بیشتر برخوردار است. سرانجام، اثرفوتورسانایی در ساختار فلز-نیمرسانا-فلز MSM با استفاده از لامپ LED قرمز مورد بررسی قرار گرفت.}, keywords_fa = {اکسید مس,اکسایش حرارتی,نانوساختار,اثر فوتورسانایی}, url = {https://nanomeghyas.ir/article_46462.html}, eprint = {https://nanomeghyas.ir/article_46462_47d47f70c13a6c1011fa2c7c6ee204a8.pdf} } @article { author = {Cheraghi Saray, S. and Hosseinkhani, A. and Taghizadeh, A. and Mohammadzadeh, H. and Hamishehkar, H.}, title = {Nano-Selenium Loading on Structure ofLactobacillus and Evaluating its AntimicrobialPotency toMake Anti-Diarrhea Drug-Supplement}, journal = {Nanoscale}, volume = {6}, number = {1}, pages = {19-28}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {Escherichia coli E.coli is the most important species that causes dysentery. Present study was conducted to investigate the synergistic antimicrobial effects of Nano-selenium and lactobacillus on E.coli to suggest anti-diarrhea bio-drug. The antimicrobial effects of experimental treatments against E.coli were evaluated by disk diffusion and well diffusion methods as a measure of the growth inhibition zone. Moreover, the minimum inhibitory concentration MIC and minimum bactericidal concentration MBC were determined by micro-dilution method. The results of the well and disk diffusion methods showed that in both tests, the highest growth inhibition zone of the "Nano selenium-loaded lactobacillus" treatment on the standard strain of E.coli was 23/6 and 23/36 mm respectively. The results of MIC and MBC determination showed that in all experimental periods, "Nano selenium-loaded lactobacillus" and "Nano-selenium lactobacillus" treatments with 590/7 and 615/38 μg/ml for MIC and 955/32 and 1195/67 μg/ml for MBC had the lowest amounts compared to other treatments P<0.05. The results of this experiment confirmed the anti-diarrhea ability of "Nano selenium-loaded lactobacillus" treatment. Therefore, provided that this test be repeated in future studies and ensured the accuracy of these results, manufacturing of bio-drug with this formulation may be advised for prevention or treatment of diarrheal disease.  }, keywords = {Nano-Selenium Particle,Lactobacillus,Antimicrobial,Escherichia coli}, title_fa = {ارگذاری ریز مغذی نانو ذره سلنیوم در ساختار باکتری‌های لاکتوباسیل و بررسی توان ضد میکروبی آن جهت ساخت مکمل دارویی ضد اسهال}, abstract_fa = {شرشیاکلی عامل اصلی اسهال خونی است. تحقیق حاضر در راستای پیشنهاد داروی زیست محیطی ضد اسهال، به بررسی اثرات هم‌افزایی و ضد میکروبی نانوذرات سلنیوم و لاکتوباسیل‌ها روی‌ اشرشیاکلی پرداخته است. توان ضد میکروبی نمونه‌های آزمایشی به روش انتشار از دیسک و چاهک به صورت اندازه‌گیری هاله عدم رشد ارزیابی شد. همچنین کمترین غلظت مهار رشد MIC و کمترین غلظت کشندگی MBC به روش رقت‌سازی انجام گردید. نتایج بدست آمده نشان داد در هر دو روش چاهک و دیسک بیشترین قطر هاله‌ عدم رشد به ترتیب با میانگین 6/23 و 36/23 میلی‌متر متعلق به تیمار "نانوسلنیوم بارگذاری شده در لاکتوباسیل‌ها‌" روی گونه استاندارد اشرشیاکلی بود. تعیین MIC وMBC نیز حاکی از آن بود که دو تیمار "نانوسلنیوم بارگذاری شده در لاکتوباسیل‌ها" و "نانوسلنیوم لاکتوباسیل" به ترتیب با میانگین کل 7/590 و 38/615 میکروگرم بر میلی‌لیتر برای MIC و میانگین کل 32/955 و 67/1195 میکروگرم بر میلی‌لیتر برای MBC، پایین‌ترین مقادیر را نسبت به سایر تیمارها داشتند 05/0P<. تمامی آزمون‌ها حاکی از توان ضد اسهالی بالای نمونه "نانوسلنیوم بارگذاری شده در لاکتوباسیل‌ها‌" بود. از اینرو به شرط تکرار آزمایش در مطالعات آتی و اطمینان از صحت نتایج بدست آمده، می‌توان ساخت داروی زیست محیطی با این فرمولاسیون را جهت استفاده درمانی توصیه نمود.}, keywords_fa = {نانو ذره سلنیوم,لاکتوباسیلوس,ضد میکروبی,اشرشیاکلی}, url = {https://nanomeghyas.ir/article_46463.html}, eprint = {https://nanomeghyas.ir/article_46463_a10698de3449fd5bf5625907b183ea5e.pdf} } @article { author = {Assar, E. and Alehdaghi, H. and Azadegan, B. and A. Mowlavi, A. and . Baedi, J and Maleki, B.}, title = {Optical properties, Quantum Dots, Gamma irradiation, Dosimetry, CdS, CQD}, journal = {Nanoscale}, volume = {6}, number = {1}, pages = {29-36}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {Herein, the optical properties of CdS and Carbon quantum dots QDs for the first time under gamma irradiation was studied. The CdS QDs were synthesized by a rapid, facile and low cost microwave assisted method and carbon QDs extracted from orange juice by hydrothermal method. The samples were exposure by gamma ray with source of Co-60 within 0-20 kGy. The results showed that gamma irradiation suppress the photoluminescence PL intensity of QDs. A linear relation between PL intensity and logarithmic dose of gamma was found for the matrixed CdS QDs deposited top of glass. The initial size of CdS QDs was indicated about 3.4 nm by transmission electron microscopy TEM. For water-soluble CdS QDs and powdered carbon QDS, PL intensity was decreased as dose of 20 kGy gamma irradiation. These results shows that the luminescent nanostructure can be a new candidate for dosimetry.}, keywords = {Optical Properties,Quantum dots,Gamma irradiation,Dosimetry,CdS,CQD}, title_fa = {بررسی خواص نورتابی نقاط کوانتومی تحت تابش پرتوهای گاما جهت کاربرد در دوزیمتری}, abstract_fa = {در این پژوهش برای اولین بار مشخصات نوری نقاط کوانتومی کادمیوم سولفید و کربن تحت تاثیر تابش دهی گاما مورد بررسی قرار گرفت. نقاط کوانتومی کادمیوم سولفید به روشی سریع، ساده، کم هزینه و محلول در آب با استفاده از تابش ریزموج و نقاط کوانتومی کربن به روش هیدروترمال سنتز شدند. این نقاط کوانتومی به صورت لایه نازک و محلول در آب تحت تابش چشمه گامای کبالت-60 برای دوزهای مختلف در بازه kGy 20 – 0 قرار گرفتند. نتایج نشان داد که شدت فتولومینسانس با افزایش دوز چشمه گاما کاهش می‌یابد. برای نقاط کوانتومی CdS که با یک پلیمر به عنوان ماده زمینه روی شیشه لایه نشانی شده بودند یک رابطه خطی بین شدت فتولومینسانس و لگاریتم دوز برقرار شد. با استفاده از عکس میکروسکوپ الکترونی گذاری اندازه نقاط کوانتومی CdS حدود nm 4/3 بدست آمد. پاسخ فلورسانس نقاط کوانتومی تحت تابش پرتوهای گاما سبب می‌شود که بتوان از این نقاط کوانتومی به عنوان دوزیمتری جدید استفاده نمود.}, keywords_fa = {مشخصات نوری,نقاط کوانتومی,تابش گاما,CdS,CQD,دوزیمتر}, url = {https://nanomeghyas.ir/article_46464.html}, eprint = {https://nanomeghyas.ir/article_46464_45851333e6c851f49adc8d998f362de9.pdf} } @article { author = {Azim Araghi, Mohammad Esmaeil and Akbari, Marzieh}, title = {Fabrication and Characterization of Optical and Electrical properties of BrInPcs Sandwich Nanostructures}, journal = {Nanoscale}, volume = {6}, number = {1}, pages = {37-42}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this work, we report on the fabrication, morphology, and electrical and optical characterization of sandwich devices of bromo indium phthalocyanine thin film nanostructures in aluminum electrodes using electron beam evaporation in a high vacuum which are promising for sensing applications. We investigate the influence of both parameters of temperature and frequency on the conduction mechanism to deter-mine the transport process of the charge carriers. Result demonstrates that the capacitance and the loss factor decrease with increasing the frequency and increase for high temperatures. The behavior of the ca-pacitance and loss factor fits well with the model of Goswami and Goswami and the results imply the domination of the hopping theory. In addition, analysis of absorption spectrum indicates that the optical band gap energy is 3eV. Furthermore, morphological analysis demonstrates that all films have a smooth surface with homogeneous small crystal grains with a nanoscale size order of 40 ±10nm. Thus, tempera-ture and frequency dependent experiments of optical and electrical parameters of the bromo indium phthalocyanine thin film nanostructures show their potential to be employed for developing a multifunc-tion sensor.}, keywords = {Electrical and optical properties,Phthalocyanine,Nanostructures}, title_fa = {ساخت و مشخصه یابی اپتیکی و الکتریکی قطعات ساندویچی نانوساختار بروموایندیوم فتالوسیانین}, abstract_fa = {در این پژوهش، ساخت، بررسی موفولوژی و مشخصه یابی الکتریکی و اپتیکی قطعات نیمه هادی که دارای ساختار ساندویچی متشکل از یک لایه نازک نانوساختارهای بروموایندیوم فتالوسیانین و الکترودهای آلومینیومی هستند گزارش می شود. برای ایجاد این قطعات از روش لایه نشانی تبخیر باریکه الکترونی در خلاء ۵-۱۰میلی بار، پرداخته شده است. برای مشخصه یابی الکتریکی تاثیر دما و فرکانس روی مکانیزم رسانش جهت تعیین فرایند انتقال حامل ها مورد آزمایش قرار گرفت. نتایج نشان می دهند که ظرفیت و عامل اتلاف با افزایش فرکانس و دما افزایش می یابند. رفتار ظرفیت و عامل اتلاف تطبیق خوبی با مدل گاسوامی-گاسوامی دارد و در این مورد تئوری هوپینگ غالب است. علاوه براین، آنالیز طیف جذبی نشان می دهد که گاف انرژی اپتیکی ۳ الکترون ولت است. بنابراین وابستگی دمایی و فرکانسی ویژگی های الکتریکی نانوساختارهای بروموایندیوم فتالوسیانین نشان می دهد که این نانوساختارها پتانسیل خوبی برای کاربرد حسگری دارند.  }, keywords_fa = {خواص الکتریکی و اپتیکی,فتالوسیانین,نانوساختار}, url = {https://nanomeghyas.ir/article_46465.html}, eprint = {https://nanomeghyas.ir/article_46465_7df0a14fb7466bc6fdefc9717500609d.pdf} } @article { author = {Dehghani, N. and Babamoradi, M. and Maleki, A.}, title = {The effect of magnetic feild on the properties of Fe3O4 nanoparticlessynthesized by co-precipitation method}, journal = {Nanoscale}, volume = {6}, number = {1}, pages = {43-48}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this paper, Fe3O4 magnetic nanoparticles were synthesized by a co-precipitation method at room temperature with and without magnetic field during the synthesizing process. Their magnetic properties were measured by vibrating sample magnetometer VSM instrument. VSM was used for studding the paramagnetic properties of the nanoparticles and the effect of the magnetic field on the magnetic properties of nanoparticles. The results showed that the presence of magnetic field during the synthetic, reduces the saturation magnetization value. The X-ray diffraction XRD pattern reveals the low crystallinity for the synthesized nanoparticles in the presence of magnetic field. The Fourier-transform infrared spectroscopy confirms the chemical bond formation. The reduction of saturation magnetization value and the crystallinity of nanoparticles can be related to the magnetic dipole orientation with the magnetic field.  }, keywords = {Fe3O4 magnetic nanoparticles,Co-precipitation method,Magnetic field}, title_fa = {اثر میدان مغناطیسی بر خواص نانو ذرات مغناطیسی Fe3O4 ساخته شده به روش هم رسوبی}, abstract_fa = {در این مقاله نانوذرات مغناطیسی اکسید آهن Fe3O4 با استفاده از روش هم‌رسوبی در دمای اتاق در دو حالت با حضور میدان مغناطیسی و در غیاب میدان مغناطیسی ساخته شدند. خواص مغناطیسی نانوذرات توسط دستگاه مغناطیس سنجی نمونه ارتعاشی VSM برای بررسی ویژگی‌های ابرپارامغناطیسی نانوذرات و اثر اعمال میدان بر خواص مغناطیسی نانوذرات مورد بررسی قرار گرفت. نتایج این آنالیز نشان داد که اعمال میدان مغناطیسی در هنگام ساخت نانوذرات، باعث کاهش مغناطش اشباع می‌شود. نتایج الگوی پراش اشعه ایکس XRD کاهش بلورینگی نانوذرات را با اعمال میدان مغناطیسی در حین ساخت نشان می‌دهند. طیف سنجی فوریه فروسرخ FT-IR تشکیل پیوندهای اکسیدآهن را در نمونه‌های ساخته شده تائید می‌کند. کاهش مغناطش اشباع و بلورینگی را می‌توان به اثر میدان مغناطیسی در جهت دهی دوقطبی‌های مغناطیسی نانوذرات در هنگام ساخت، نسبت داد.}, keywords_fa = {نانوذرات مغناطیسی اکسید آهن,روش همرسوبی,میدان مغناطیسی}, url = {https://nanomeghyas.ir/article_46466.html}, eprint = {https://nanomeghyas.ir/article_46466_ccb113e9a6b7173119b4f501badc1e36.pdf} } @article { author = {Heydaryan, K. and Almasi Kashi, M. and Sharifi, N.}, title = {Reduced Graphene Oxide/Magnetite Nanocomposites: Synthesis and Characterization}, journal = {Nanoscale}, volume = {6}, number = {1}, pages = {49-54}, year = {2019}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this paper, an efficient method for the synthesis of Reduced Graphene Oxide/Magnetite RGO/Fe3O4 nanocomposite is presented. The properties of RGO/Fe3O4 nanocomposite were investigated using FT-IR, XRD, VSM and SEM. The average size of Fe3O4 nanoparticles on graphene substrates was obtained 22 ± 5 nm using SEM images. The VSM results demonstrate that there is no apparent change in the properties of magnetite nanoparticles in RGO/Fe3O4 nanocomposite. Therefore, this nanocomposite could be appropriate for magnetic applications. In cyclic voltammetry studies, oxidation current enhancement was observed when magnetite nanoparticles loaded on graphene substrates, which could make RGO/Fe3O4 nanocomposite as an efficient electrochemical sensor.}, keywords = {Graphene oxide,Nanocomposites,Magnetite nanoparticles,Superparamagnetic,Oxidation Current}, title_fa = {ساخت و شناسایی خواص نانوکامپوزیت گرافن اکسید کاهش‌یافته/ مگنتیت}, abstract_fa = {در این مقاله یک روش کارآمد برای ساخت نانوکامپوزیت گرافن اکسید کاهش‌یافته/ مگنتیت ارائه ‌شده است. با استفاده از آنالیز‌های FT-IR، XRD، VSM و SEM خواص و ویژگی‌های نانوکامپوزیت گرافن اکسید کاهش‌یافته/ مگنتیت مورد بررسی قرار گرفت. با استفاده از تصاویر SEM میانگین اندازه نانوذرات مگنتیت بر روی بستر گرافنی برابر با مقدار 5±22 نانومتر اندازه‌گیری شد. نتایج VSM نشان داد که با وجود حضور گرافن در نانوکامپوزیت گرافن اکسید کاهش-یافته/ مگنتیت، ویژگی مغناطیسی نانوذرات مگنتیت تغییر قابل ملاحظه‌ای پیدا نکرده است که نشان دهنده مزیت این نانوکامپوزیت جهت استفاده‌های مغناطیسی است. بررسی‌های ولتامتری چرخه‌ای نیز نشان داد که با تثبیت نانوذرات مگنتیت بر روی بستر گرافنی، جریان اکسایش نسبت به گرافن اکسید کاهش‌یافته به میزان قابل توجهی افزایش پیدا کرده است که می‌تواند در ویژگی حسگری نانوکامپوزیت گرافن اکسید کاهش‌یافته/ مگنتیت کارآمد باشد.}, keywords_fa = {گرافن اکسید,نانو کامپوزیت,نانو ذرات مگنتیت,سوپر پارامغناطیس,جریان اکسیدی}, url = {https://nanomeghyas.ir/article_46467.html}, eprint = {https://nanomeghyas.ir/article_46467_23794e04bd05abc848807c11125ae63f.pdf} }