@article { author = {Samadi, S. and Parsa, A. and Hadian, A. and Partoyi Motlagh, A. and Zakaria, S.A.}, title = {Removal Cu(II) and Pb(II) Ions by Modified Bentonite with NdTiO2 and Some Organic Polymers}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {1-12}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In order to increase adsorption capacity, Nd-TiO2/PEG/Bentonite and Nd-TiO2/PVP/Bentonite nanocomposites were synthesized by PEG and PVP, with sol-gel method. Microstructure nanocomposites were investigated by XRD, FESEM and EDS analyses. These analyzes confirmed the expected structure and formation of anatase titania phase. Synthetic nano-sorbents used to removal of Cu II and Pb II ions from water. The affective removal parameter was optimized and that contact time for TiO2/PEG/bentonite and TiO2/PVP/bentonite nanocomposites is 30 and 60 seconds, respectively, and for both nanocomposite, sorbent amount, temperature and pH were 0.005 g, 7 and 25℃, respectively. Investigation of interfering ions didn’t have any considerable impact on removal efficiency. The isotherm adsorption shows all the experimental data followed the Langmuir model.}, keywords = {Removal,Copper (II),Lead (II),Bentonite,Titania}, title_fa = {حذف یون‌های مس II و سرب II توسط بنتونیت اصلاح شده با Nd-TiO2 و برخی پلیمرهای آلی}, abstract_fa = {به‌منظور افزایش ظرفیت جذب، با استفاده از دو پلیمر پلی‌اتیلن‌گلیکولPEG و پلی‌وینیل‌پیرولیدون PVP، نانو کامپوزیت‌های Nd-TiO2/PEG/Bentonite و Nd-TiO2/PVP/bentonite به روش سل-ژل ساخته شد. میکرو ساختار نانو کامپوزیت‌های سنتزی توسط آنالیزهای XRD، FESEM و EDS مورد بررسی قرار گرفت و ساختار مورد انتظار و تشکیل فاز آناتاز تیتانیا را تائید کرد. از نانو جاذب‌های ساخته‌شده برای حذف دو یون مس II و سرب II از آب استفاده و پارامترهای مؤثر بر حذف، بهینه‌سازی شدند که عبارت‌اند از: زمان تماس برای نانو کامپوزیت TiO2/PEG/bentonite و TiO2/PVP/bentonite به ترتیب برابر 30 و 60 ثانیه و مقدار جاذب، pH و دما برای هر دو نانو جاذب به ترتیب برابر 005/0 گرم، 7 و ℃ 25 است. بررسی اثر یون‌های مزاحم هیچ تأثیر قابل‌ملاحظه‌ای روی راندمان حذف نداشت. مطالعه ایزوترم جذب نشان داد که تمام داده‌های تجربی از مدل ایزوترم جذب لانگمویر پیروی می‌کنند.}, keywords_fa = {حذف,مس (II),سرب (II),بنتونیت,تیتانیا}, url = {https://nanomeghyas.ir/article_46452.html}, eprint = {https://nanomeghyas.ir/article_46452_b6c5086759ce2f2f08484526b711eeba.pdf} } @article { author = {Pourfayaz, F. and Azizi Ziarani, A. and Kasaeian, A. and Razi Astaraei, F.}, title = {Design and Simulation of a Nanofluid-based Solar Absorption- ejection Refrigeration Syste}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {13-21}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In the present study, a novel refrigeration cycle which works on base the absorption refrigeration cycle and uses solar energy for supply energy in the generator, is investigated via computer simulation. For collecting the solar energy, a trough parabolic collector is used, and for enhancement the heat transfer to working fluid, the synthesis-baed nanofluid containing Al2O3 nanoparticles is used. The investigation of the fluid flow inside absorber tube shows that the convection heat transfer coefficient is increased as a result of increasing the volume fraction of the nanoparticles in nanofluid. Also, using the nanofluid in the heat exchanger inside the generator increases the heat transfer to the solution inside the generator and COP of the absorption cycle. The benefits of this research are, the analytical investigation of the new combined absorption-ejection refrigeration cycle which can gives a good understanding of the effect of different parameters on the system performance and investigation of the using nanofluid in the absorber tube of trough parabolic collector in the solar systems.}, keywords = {Refrigeration Absorption cycle,nanofluid,Solar Collector,anoparticles}, title_fa = {طراحی و شبیه سازی یک سیستم تبرید جذبی- اجکتوری خورشیدی مبتنی بر نانوسیال}, abstract_fa = {پژوهش حاضر چرخه سردسازی نوینی را که بر پایه ی چرخه جذبی عمل می نماید و انرژی خورشیدی را برای تأمین انرژی مورد نیاز در ژنراتور بکار می‌گیرد، مورد بررسی قرار می‌دهد. برای جمع‌آوری انرژی خورشیدی از کلکتور سهموی استفاده می شود که در آن برای افزایش انتقال حرارت به سیال عامل از نانوسیال نانوذرات اکسید آلومینیوم در یک سیال پایه روغنی استفاده شده است. در بررسی جریان سیال در داخل لوله جاذب دیده می‌شود که با افزایش غظت نانوذرات، ضریب انتقال حرارت جابجایی نیز افزایش می یابد. همچنین استفاده از نانوسیال در مبدل حرارتی استفاده شده در ژنراتور، باعث بالا رفتن انتقال حرارت در ژنراتور و در نتیجه کاهش اندازه مبدل حرارتی در چرخه جذبی مورد نظر می شود. مزیت اصلی این پژوهش، بررسی تحلیلی چرخه نوین جذبی- اجکتوری به موازات بررسی استفاده از نانوسیال در کلکتور سهموی، و مطالعه تاثیرات پارامترهای موثر بر عملکرد سیستم و در بررسی استفاده از نانوسیال در سیستم‌های خورشیدی می باشد.}, keywords_fa = {تبرید جذبی,نانوسیال,کلکتور خورشیدی,نانوذرات}, url = {https://nanomeghyas.ir/article_46453.html}, eprint = {https://nanomeghyas.ir/article_46453_802ff2010c4d0b4be798452bb4d8226f.pdf} } @article { author = {Toghroli, H. and Saravani, H.}, title = {Synthesis and Characterization of Copper-oxide Nanoparticles and Their Application for Adsorbing Aluminon}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {23-32}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this research copper oxide nanoparticles prepared by co-precipitation method and its ability to adsorb Aluminon been studied in laboratory scale. Samples were detected using the EDX, SEM, VSM, XRD and FT-IR methods. The results of infrared spectroscopy FT-IR confirm covalent bond for Cu-O. X-ray diffraction XRD indicates that the sample has single-phase with monoclinic crystal system. . The average size of the particles of sample was calculated to be 11/41 nm. UV-Vis spectra obtained from the survey indicate that the copper oxide nano-particles can be adsorb Aluminon from aqueous solution. The highest percentages of aluminum, take place in pH 2, t 40 minutes and 3× 10-4M. Experimental data in optimum conditions have been used to model the absorption behavior in five isotherm equations, which are Langmuer, Freundlich, Langmuer-Ferrandich, Tous and Khan, absorption data are in good agreement with Langmuir-Freundlich isotherm and kinetics Absorption interactions were investigated by four absorption mechanisms: pseudo-first kinetics, pseudo-second order, alleviation and intrinsic molecular penetration. The results of the data obtained with pseudo-second order kinetics are the most consistent.}, keywords = {Copper oxide,Nanoparticle,Aluminon,bsorption}, title_fa = {تهیه و شناسایی نانو ذرات اکسیدی مس و کاربرد آن در جذب آلومینون}, abstract_fa = {در این تحقیق نانو ذرات مس اکسید به روش هم رسوبی تهیه شده و توانایی آن در جذب سطحی آلومینون در مقیاس آزمایشگاهی مورد مطالعه قرار گرفته است. نمونه‌های تهیه شده با استفاده از روش های EDX ، SEM ،VSM ،XRD وFT-IR مورد شناسایی قرارگرفتند نتایج حاصل از طیف سنجی مادون قرمز FT-IR تشکیل پیوند کوالانسی CuO در نمونه ی تهیه شده را تایید می‌کند. پراش پرتو ایکسXRD نشان می‌دهد که نمونه‌ی مورد نظر تک فازی با سیستم کریستالی مونوکلینیک می‌باشد. همچنین سایز ذرات تشکیل شده در حدود 11/41 نانومترمی‌باشد. بررسی طیف های به دست آمده از اسپکتروفتومتری UV-Vis نشان می‌دهد که نانو ذرات مس اکسید تهیه شده می‌تواند به عنوان یک جاذب کارآمد برای حذف آلومینون از محیط آبی مورد استفاده قرار گیرد. بیشترین درصد حذف آلومینون، درشرایط 2 pH، زمان 40دقیقه و غلظت 4-10×3 مولار از آن انجام شد. از داده های تجربی در شرایط بهینه، برای مدل سازی رفتار جذب سطحی در پنج معادله ایزوترم استفاده شده است که عبارتند از لانگموئر، فرندلیچ، لانگموئر-فرندلیچ، توس و خان، داده های جذب مطابقت خوبی با ایزوترم لانگموئر-فرندلیچ دارد و سینتیک بر هم کنش های جذب با چهار مکانیسم جذبی: سینتیکی شبه درجه اول، شبه درجه دوم، الویچ و نفوذ درون مولکولی مورد بررسی قرار گرفتند. نتایج داده های به دست آمده با سینتیک شبه درجه دوم بیشترین مطابقت را دارد.}, keywords_fa = {مس اکسید,نانو ذرات,آلومینون,جذب سطحی}, url = {https://nanomeghyas.ir/article_46454.html}, eprint = {https://nanomeghyas.ir/article_46454_f84d259340fcf4754eedd5729d44cd4e.pdf} } @article { author = {Kazemeini, M.}, title = {Biodiesel Synthesis over CaO/talc Nanopowders: Effect of Calcination Temperature and Kinetic Study}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {33-39}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {A solid CaO/talc mixed oxide catalyst was prepared using simple wet impregnation method. The prepared nanocatalyst was used in the transesterification reaction of canola oil and methanol for biodiesel synthesis. The effects of calcination temperature and reaction temperature were investigated on the activity of the catalyst. In addition, rate of the reaction has been studied by a kinetic model, and the kinetic parameters were determined. Surface properties and structure of the catalyst were characterized with powder X-ray diffraction XRD, thermogravimetry /derivative thermogravimetry TG/DTG, and Brunauer–Emmett–Teller BET, indicating that the performance of the nanocatalyst corresponded to the generation of active sites and thermal activation.}, keywords = {Transesterification,Biodiesel,Calcination Temperature,Heterogeneous nano catalyst,Kinetic study}, title_fa = {تولید زیست‌گازوییل توسط نانوذرات کلسیم بر پایه تالک: اثر دمای کلسیناسیون و مطالعه سینتیکی}, abstract_fa = {در این تحقیق یک مخلوط نانوساختار فلزی CaO/talc با روش ساده تلقیح مرطوب سنتز شد. نانوکاتالیست تهیه‌شده در واکنش تبادل استری شدن روغن کانولا و متانول برای تولید زیست‌گازوییل استفاده شد. تأثیر دمای کلسیناسیون و دمای واکنش روی فعالیت کاتالیست در واکنش بررسی شد. همچنین سرعت واکنش با یک مدل سینتیکی مطالعه گردید و پارامترهای سینتیکی محاسبه شد. مشخصه‌های سطحی و ساختاری کاتالیست با استفاده از طیف‌سنج پراش اشعه ایکس XRD، آنالیز توزین حرارتی/مشتق توزین حرارتی TG/DTG و مطالعات مساحت برونر، امت، تلر BET بررسی گردید. این مطالعات نشان داد که عملکرد بهینه نانوکاتالیست در اثر تولید مراکز فعال در سطح کاتالیست و بهبود ساختار آن می‌باشد.}, keywords_fa = {تبادل استری شدن,زیست‌ گازوییل,دمای کلسیناسیون,نانو کاتالیست ناهمگن,مطالعه سینتیکی}, url = {https://nanomeghyas.ir/article_46468.html}, eprint = {https://nanomeghyas.ir/article_46468_29b245f418e555b58313878d0fb47a0d.pdf} } @article { author = {Ahmadi, P. and Ahmadi, S.}, title = {Effect of Glutamate on the Solvation of Li Doped Carbon Nanotube}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {41-46}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {Due to the application of nanotubes in biological systems, low solubility of these nano materials is an important problem in this field of nanotechnology. Therefore, study of the solvation of bio-applicable nanotubes was the aim of this research. Li doped carbon nanotube and its glutamate complex were first modeled by quantum mechanical calculations and then Monte Carlo simulations were applied to study their solubility in water. The solvation free energy computations show that the interaction of Li doped carbon nanotube with glutamate amino acid, increase its solvation in aqueous solution. The results were also indicated that electrostatic interactions play a distinctive contribution in the solvation of nanotube after interaction with glutamate.}, keywords = {Monte Carlo Simulation,Carbon Nanotube,Lithium,solvation free energy,Glutamate}, title_fa = {اثر بر همکنش با گلوتامات بر انحلال نانولوله ی کربنی دوپه شده با لیتیم}, abstract_fa = {نانولوله ها کاربرد های بیولوژیکی فراوانی دارند، ولی قابلیت حل شدن ضعیف آن ها در محلولهای فیزیولوژیکی مانعی بزرگ برای مطالعه در این شاخه از نانو تکنولوژی می باشد . در واقع پیش شرط سازگاری بیولوژیکی نانولوله ها ، افزایش حلالیت آنها است. بررسی حلالیت نانولوله های مورد استفاده در سیستمهای بیولوژیکی هدف اصلی این مطالعه است. ابتدانانو لوله کربنی دوپه شده با لیتیم و کمپلکس گلوتامات آن با استفاده از محاسبات مکانیک کوانتمی مدل سازی شدند و در محیط آبی قرار گرفتند. سپس شبیه سازی مونت کارلو به منظور بررسی انحلال ساختارهای مربوطه در آب مورد استفاده قرار گرفت. محاسبات انرژی آزاد انحلال ترکیبات نشان داد که در اثر برهم کنش نانو لوله کربنی دوپه شده با لیتیم و آمینو اسید گلوتامات انحلال آن در محیط آبی افزایش می یابد. همچنین نتایج نشان داد که بر همکنشهای الکترواستاتیک بیشترین سهم را در حلالیت نانولوله پس از بر همکنش با گلوتامات دارد.}, keywords_fa = {شبیه سازی مونت کارلو,نانولوله کربنی,لیتیم,انرژی آزاد انحلال,گلو تامات}, url = {https://nanomeghyas.ir/article_46469.html}, eprint = {https://nanomeghyas.ir/article_46469_7e17f93c7e8ef6458ead9c50d5e5e9df.pdf} } @article { author = {kouhi, M. and Vahedi, A. and Akbarzadeh, A.}, title = {Influence of Size and Position of Defect on Quadratic Electro Optic Effect of GaN/AlGaN Spherical Quantum Dot}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {47-55}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this paper, a new spherical quantum dot is proposed to management and enhancement of third order nonlinear optical susceptibility of quadratic electro optic effect. This nanostructure is containing defective shell surrounding with two well. The size of quantum dot, thickness, position and potential of defect have a significant effect on third order optical susceptibility. By numerically solving of Schrödinger equation in the effective mass approximation the third order nonlinear optical susceptibility were calculated. The results are shown that with increasing of dot size the third order nonlinear optical susceptibility is increased. Also, with increasing of defect shell thickness the third order nonlinear optical susceptibility is increased and resonance wavelength is red shifted. The most value of third order optical susceptibility is available when in the symmetric condition of defect position, the defect potential becomes equal to the barrier potential.}, keywords = {Quadratic Electro-Optic Effect,Optical Susceptibility,defect,Quantum Dot}, title_fa = {تاثیر اندازه و موقعیت نقص روی اثر الکترواپتیک مربعی نقطه کوانتومی کروی GaN/AlGaN}, abstract_fa = {در این مقاله، یک نقطه کوانتومی کروی جدید برای افزایش و مدیریت پذیرفتاری نوری غیرخطی مرتبه سوم اثر الکترو اپتیک مربعی پیشنهاد شده‌است. این نانوساختار شامل پوسته نقص احاطه شده توسط دو چاه پتانسیل هست. اندازه نقطه کوانتومی، ضخامت، موقعیت و پتانسیل پوسته‌ی نقص تاثیر زیادی روی پذیرفتاری نوری غیرخطی مرتبه سوم دارند. با حل عددی معادله شرودینگر در تقریب جرم موثر، پذیرفتاری نوری غیرخطی مرتبه سوم محاسبه شد. نتایج نشان می‌دهند با افزایش اندازه نقطه‌ی کوانتومی پذیرفتاری نوری غیرخطی مرتبه سوم افزایش می‌یابد. همچنین با افزایش ضخامت پوسته‌ی نقص پذیرفتاری نوری غیرخطی مرتبه سوم افزایش و طول موج تشدید انتقال به سرخ پیدا می‌کند. بیشترین مقدار پذیرفتاری نوری غیرخطی مرتبه سوم وقتی قابل حصول هست که در وضعیت متقارن موقعیت پوسته‌ی نقص، پتانسیل نقص برابر پتانسیل پله شود.}, keywords_fa = {اثر الکترواپتیک مربعی,پذیرفتاری نوری,نقص,نقطه کوانتومی}, url = {https://nanomeghyas.ir/article_46470.html}, eprint = {https://nanomeghyas.ir/article_46470_c1e1a4fa3878b6f7467657e2135e46b4.pdf} } @article { author = {Rahmani, N. and Bagheri Garmarudi, A. and Khanmohammadi, M}, title = {Fabrication and Evaluation of β-Cyclodextrin Modified Nano Zeolite as Carrier for Curcumin}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {57-66}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this study, nano ZSM-5 zeolite was synthesized in the absence of organic template by hydrothermal method. In the next step for loading of curcumin in nano carrier was selected methanol reflux method. Characterization of nanoparticles was performed by X-ray diffraction, Scanning electron microscope, Fourier transform infrared spectroscopy and Thermal gravimetric analysis. Efficiency of loading and drug release was determined by UV-Vis spectrophotometry. Scanning electron microscopy showed that smallest of particle size is approximately 44 nm. Fourier transform infrared spectrometer and Thermal gravimetric analysis confirmed synthesis and functionalization of nano zeolite with cyclodextrin as well as complex formation of curcumin and modified nano zeolite. The drug loading on the surface of the nanoparticles in optimal conditions was 95. and efficiency of drug release was evaluated 43 in pH 7.4 and 61 in pH5.5. This indicates that the performance of the drug delivery system in tumor tissues is higher than healthy tissues. The synthesized nanocarrier is an appropriate approach for the delivery of hydrophobic drugs to the target tissue such as curcumin drug that has sub-optimal pharmacokinetics and poor bioavailability.}, keywords = {Zeolite,Cyclodextrin,Drug Delivery,curcumin}, title_fa = {ساخت و ارزیابی نانوذرات زئولیت ZSM-5 اصلاح شده با بتاسیکلودکسترین به عنوان حامل برای کورکومین}, abstract_fa = {در این پژوهش، نانو زئولیت ZSM-5بدون قالب به روش هیدروترمال سنتز و با بتاسیکلودکسترین اصلاح شد. در مرحله بعد برای بارگذاری کورکومین در نانو حامل از روش رفلاکس متانول استفاده شد تا پایداری بیشتری برای حمل دارو داشته باشد. تعیین خصوصیات نانوذرات تهیه شده توسط پراش پرتوX، میکروسکوپ الکترونی روبشی، طیف سنج زیر قرمز تبدیل فوریه، طیف بینی پراکنش انرژی پرتو ایکس و آنالیز وزن سنجی حرارتی انجام شد. بازده بارگذاری و رهایش دارو با استفاده از روش اسپکتروفتومتری UV-Vis بررسی شد. تصاویر میکروسکوپ الکترونی روبشی نشان داد که اندازه ذرات زئولیتZSM-5حدود 44 نانومتر است و طیف سنج زیر قرمز تبدیل فوریه، طیف بینی پراکنش انرژی پرتو ایکس و نیز آنالیز وزن سنجی حرارتی، سنتز و عامل دارشدن نانو ذرات زئولیت با سیکلودکسترین و همچنین تشکیل کمپلکس نانوزئولیت اصلاح شده و کورکومین را تایید کرد.بازده بارگذاری دارو بر سطح نانوذرات در شرایط بهینه 95 بود و بازده رهایش دارو در 4/7 pH حدود 43 درصد و در 5/5 pHحدود 61 درصد ارزیابی شد که بیانگر کارایی بالای سیستم حامل دارو در بافت‌های سرطانی در مقایسه با بافت‌های سالم است. بنابراین نانو حامل سنتز شده رویکرد بسیار مناسبی برای تحویل دارو‌های آب‌گریز مانند کورکومین به بافت هدف است که کاربردشان در درمان به دلیل فعالیت دارویی نامطلوب وفراهمی زیستی پایین محدود شده است}, keywords_fa = {زئولیت,سیکلودکسترین,داروسانی,کورکومین}, url = {https://nanomeghyas.ir/article_46471.html}, eprint = {https://nanomeghyas.ir/article_46471_f22cd9565a8d164b8d43f3ccce53cbf6.pdf} } @article { author = {Faizabadi, E. and Gramizadeh, H.}, title = {Spin Polarization and Spin Conductance in a Single Layer Zigzag Black Phosphorene Nanoribbon in the Presence of External Electric Field}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {67-71}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {Spin-dependent electronic transport in a single-layer zigzag phosphorene nanoribbon ZPNR in a ballistic regimen has been investigated by using the non-equilibrium Green´s function method combined with the Lopez Sancho technique.Our findings show that spin conduction can be adjusted by an external electric field applied via the gate and perpendicular to the conduction channel. In particular, we have achieved the conditions that this zigzag phosphorene channel can play as a spin converter. So that the input spin up beam, under certain conditions, turns out to be an output spin down beam, which is of great importance in spintronics.}, keywords = {Nonequilibrium Green's function,Phosphoerene Nanoribbon,Rashba Interaction,Lopez Sancho Technique}, title_fa = {قطبش اسپینی و رسانش وابسته به اسپین در نانو نوار تک لایه زیگزاگ فسفرین در حضور میدان الکتریکی خارجی}, abstract_fa = {با استفاده از روش تابع گرین غیر تعادلی ترکیب شده با تکنیک لوپز سانچو، به تحلیل و بررسی ترابرد الکترونی وابسته به اسپین در نانونوار زیگزاگ فسفرینZPNR تک لایه در رژیم بالستیک پرداخته شده است. مطالعات نشان میدهد که رسانش اسپینی میتواند توسط یک میدان الکتریکی خارجی قابل کنترل که از طریق گیت و عمود بر کانال رسانش اعمال شده، تنظیم شود. به طور ویژه به شرایطی دست یافتهایم که این کانال فسفرین میتواند به عنوان یک تبدبل کنندهی اسپین ایفای نقش کند. به طوریکه باریکه اسپین بالای ورودی را تحت شرایط خاص به باریکه اسپین خروجی پایین تبدیل کند که از اهمیت بالایی در اسپینترونیک برخوردار است.}, keywords_fa = {تابع گرین غیر تعادلی,نانو نوار زیگزاگ فسفرین,برهمکنش راشبا,تکنیک لوپز سانچو}, url = {https://nanomeghyas.ir/article_46472.html}, eprint = {https://nanomeghyas.ir/article_46472_fdafac67226ae88f7f9473c60d69498a.pdf} } @article { author = {Mahdavi, R. and Ashraf Talesh, S.S.}, title = {Experimental Investigation of Enhanced SelfcleaningProperties of Alkyd Resin by Modified Zinc OxideNanoparticles}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {73-81}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this research, the efficiency of the self-cleaning property of alkyd resin containing zinc oxide ZnO nanoparticles has been investigated. Production of surfaces with self-cleaning property is possible by photocatalytic degradation method based on the chemical degradation of contaminated materials under light radiation. For this purpose, pure and doped ZnO nanoparticles were synthesized by sol-gel method as a pigment. The structure, morphology and photocatalytic performance of particles were investigated by X-Ray diffraction analysis XRD, transient electron microscopy TEM and UV-VIS spectrophotometer, respectively. The polymeric coating based on the alkyd resin from the type of long oil and white spirit solvent was prepared and was applied on the galvanized sheet by an applicator with a thickness of 100 microns. Hexagonal structure with an average size of 30 nm and rod-like structure with an average size of 50 nm were obtained for pure ZnO nanoparticles and doped ZnO nanoparticles, respectively. Photocatalytic activity of applied coatings exposed to methyl orange contaminant and ultraviolet radiation was measured and its optical properties were compared to coating including nanopigments titanium dioxide TiO2 as the reference sample. According to the results, doped ZnO sample after 6 hours radiation, has had 40 of degradation. While undoped ZnO form and TiO2 particles at the same time have created 25 and 35 of degradation, respectively. The kinetic investigation of degradation showed that degradation follows well the first order kinetic equation.}, keywords = {Zinc oxide,Doped nanoparticles,Self-cleaning,Alkyd resin,Methyl orange}, title_fa = {بررسی تجربی افزایش خواص خودتمیزشوندگی رزین آلکیدی با استفاده از نانوذرات اصلاح شده اکسیدروی}, abstract_fa = {در این تحقیق، کارایی خاصیت خودتمیزشوندگی رزین آلکیدی حاوی نانوذرات اکسیدروی ZnO بررسی شده است. تولید سطوح با خاصیت خودتمیزشوندگی به روش تجزیه فوتوکاتالیستی بر اساس تخریب شیمیایی مواد آلاینده در اثر تابش نور امکان پذیر می باشد. برای این منظور نانوذرات خالص و دوپ شده ZnO به روش سل ژل به عنوان رنگدانه سنتز شدند. ساختار، مورفولوژی و عملکرد فوتوکاتالیستی ذرات به ترتیب با آنالیز های پراش پرتو ایکس XRD، میکروسکوپ الکترونی عبوری TEM و اسپکتروفوتومتر UV-VIS بررسی گردید. پوشش پلیمری بر پایه رزین آلکیدی از نوع Long Oil و حلال وایت اسپریت تهیه و توسط یک اپلیکاتور با ضخامت 100 میکرون بر روی ورق گالوانیزه اعمال گردید. ساختار هگزاگونال با اندازه متوسط 30 نانومتر برای نانوذرات خالص ZnO و ساختار میله ای با اندازه متوسط 50 نانومتر برای نانوذرات دوپ شده ZnO به دست آمد. فعالیت فوتوکاتالیستی پوشش های اعمال شده با قرارگیری در معرض آلاینده متیل اورانژ و پرتو فرابنفش اندازه گیری و خصوصیات نوری آن با پوشش حاوی نانورنگدانه تیتانیوم دی اکسید TiO2 به عنوان نمونه مرجع مقایسه گردید. با توجه به نتایج، نمونه دوپ شده ZnO بعد از 6 ساعت تابش، 40 درصد تخریب را داشته است. در حالی که فرم دوپ نشده ZnO و ذرات TiO2 طی همین مدت به ترتیب 25 و 35 درصد تخریب را به وجود آوردند. بررسی سینتیکی تخریب نشان داد که تخریب به خوبی از معادله سنتیک مرتبه اول پیروی می کند.}, keywords_fa = {اکسیدروی,نانوذرات دوپ شده,خودتمیزشوندگی,رزین آلکیدی,متیل اورانژ}, url = {https://nanomeghyas.ir/article_46473.html}, eprint = {https://nanomeghyas.ir/article_46473_b1b286ada18e399911752b233ba90a4b.pdf} } @article { author = {Salemiani, J. and Honarasa, F.}, title = {Removal of Bromocresol Green by Using of Iron Oxide/Carbon Nanocomposite}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {83-91}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {Bromocresol green is a dye of the triphenylmethane family which present as pollutant in textile industry. In this work, removal of bromocresol green as a water pollutant was performed by using of carbon/iron oxide magnetic nanocomposite. Removal efficiency of sorption process was obtained by using of UV-Vis spectroscopy. At first, the effect of important parameters on adsorption process such as pH, dose of sorbent and contact time was explored. The maximum removal was obtained at pH 5 during 2 minutes. Then, proposed nano sorbent was used for removal of bromocresol green in real samples. Also, equilibrium isotherm studies were examined by application of different conventional models such as Langmuir, Freundlich, Temkin and DR models to explain the experimental data. Fast kinetics of sorption process is one of the main advantages of proposed nano sorbent. Also, as a result, the best fitted model was DR which indicated physical absorption process. Also, Qm theoretical maximum adsorption capacity was obtained as 159 mg g-1 which is better than the corresponding values of other previously reported sorbent. As a result, iron oxide/carbon nanocomposite was used successfully for removal of bromocresol green.}, keywords = {Iron oxide nanoparticles,Carbon dot,Bromocresol green,pollutants,Nanocomposite}, title_fa = {حذف آلاینده ی بروموکروزول سبز با استفاده از نانوکامپوزیت مغناطیسی آهن/کربن}, abstract_fa = {بروموکروزول سبز یک رنگ از خانواده تری فنیل متان هاست که به عنوان آلاینده در فاضلاب کارخانه های نساجی یافت می شود. در این کار حذف بروموکروزول سبز به عنوان یک آلاینده آب توسط نانوکامپوزیت مغناطیسی آهن/کربن بررسی شده است. برای انجام این کار درصد حذف با استفاده از طیف سنجی ماورای بنفش-مرئی محاسبه گردیده است. در ابتدا تاثیر پارامترهای تاثیرگذار مانند pH محلول، مقدار جاذب و زمان تماس بر روی فرایند جذب بررسی شد. بیشترین میزان حذف در pH 5 در طی زمان 2 دقیقه بدست آمد. همچنین، نانوجاذب ارائه شده جهت حذف بروموکروزول سبز در نمونه های حقیقی مورد استفاده قرار گرفت. سینتیک بالای جذب رنگ بر روی جاذب به عنوان یکی از مزایای این نانوجاذب مطرح است. همچنین طبق یافته های بدست آمده ایزوترم دوبین-رادشکویچ بهترین تطبیق را با داده های تجربی نشان می دهد. بر طبق این ایزوترم جذب بروموکروزول سبز بر روی جاذب بصورت فیزیکی انجام شده است. همچنین با استفاده از این ایزوترم مقدار Qm ماکزیمم ظرفیت جذب تئوریmg g-1 159 بدست می آید که نسبت به جاذب های دسترس دیگر مقدار قابل توجه ای است. نتایج حاصله بیانگر این است که نانوکامپوزیت مغناطیسی آهن/کربن بطور موفقیت آمیزی می تواند جهت حذف بروموکروزول سبز استفاده شود.}, keywords_fa = {نانوذرات آهن اکسید,نقاط کربنی,بروموکروزول سبز,آلاینده ی آب,نانوکامپوزیت}, url = {https://nanomeghyas.ir/article_46474.html}, eprint = {https://nanomeghyas.ir/article_46474_8dcd409e665594a793c797345574f508.pdf} } @article { author = {Malekiyan, M. and Fadavieslam, M.R. and Ardyanian, M.}, title = {Effect of Complexing Agents on Structural and Optical Properties of Zinc Oxide Nanoparticles Synthesized by Solvothermal Method}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {93-98}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this study, Zinc Oxide ZnO semiconductor nanoparticles were synthesized by solvo thermal method using Zinc nitrate as the precursor; the effect of different complexing agents as Urea, citric acid, ethylene glycol and ammonium fluoride on physical properties of nanoparticles was studied. Crystal structure and surface morphology of the samples were characterized by X-ray diffraction XRD and field emission scanning electron microscopy FESEM. Results of XRD patterns describe the preferred peaks corresponding 100, 002, 101, 102, 110 and 103 planes with hexagonal wurtzite structure of Zinc Oxide. Nano crystallite sizes were calculated in the range of 14 to 32 nm. FESEM images show uniform shapes of the samples. Absorbance curves based on UV-Vis spectroscopy describe a shift in absorption edge This shift could be attributed to change in Optical gap of the nanoparticles in the range of 2.13 to 2.95 eV. as a function of the kind of complexing agent.}, keywords = {Zinc oxide nanoparticles,solo thermal}, title_fa = {اثر عوامل کمپلکس ساز بر خواص ساختاری و اپتیکی نانوذرات اکسید روی سنتز شده به روش حلال - گرمایی}, abstract_fa = {در این پژوهش نانوذرات نیمرسانای اکسید روی ZnO با استفاده از نمک اولیه نیترات روی به روش حلال - گرمایی تهیه شد و اثر عوامل کمپلکس ساز اوره، آمونیوم فلوراید، اسید سیتریک و اتیلن گلیکول بر روی خواص فیزیکی نانوذرات بررسی شد. ساختار بلوری و مورفولوژی سطح نمونه‌های تهیه شده توسط آنالیز پراش پرتو ایکس XRD و میکروسکوپ الکترونی روبشی اثر میدان FESEM مطالعه شد. نتایج پراش پرتو ایکس نشان داد که نمونه‌ها دارای قله های ارجح مربوط به صفحات 100، 002، 101، 102، 110 و 103 فاز اکسید روی و دارای ساختار بلوری هگزاگونال هستند. محاسبات بر مبنای آنالیز پرتو ایکس نشان داد که اندازه نانو بلورکها در گستره 14 تا 32 نانومتر است. تصاویر FESEM نمونه‌ها شکل یکنواختی از آنها را نشان داد. منحنی های جذب حاصل از طیف سنجی UV-Vis نشان دهنده جابجایی لبه جذب با تغییر عامل کمپلکس ساز است، که بیانگر تغییرات گاف انرژی نانوذرات در گستره 13/2 تا eV 95/2 بصورت تابعی از نوع عامل کمپلکس ساز است.}, keywords_fa = {نانوذرات اکسید روی,سلووترمال}, url = {https://nanomeghyas.ir/article_46476.html}, eprint = {https://nanomeghyas.ir/article_46476_ea51b80e1a6ecc5622e606e2741cb124.pdf} } @article { author = {Haghighi, M. and Minbashi, M. and Taghavinia, N. and Mahdavi, S.M. and Kordbacheh, A.A}, title = {Theoretical Study of the SnS2 Nanostructure Performance as a Buffer Layer in CuIn1-xGaxS(e)2 Solar Cell and its Comparison with CdS}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {99-104}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {In this paper, firstly, the CIGSe solar cell with a different Ga/Ga In ratio was modeled based on experimental data using the SCAPS software. Then, the SnS2 composition was proposed as a suitable buffer for the elimination of toxic CdS compounds. According to the modeling results, SnS2 is a very suitable material for substitution of the toxic CdS.}, keywords = {CIGS(e) solar cell,SCAPS software,Buffer layer,SnS2 nanostructure layer,Conduction band offset}, title_fa = {بررسی نظری عملکرد نانوساختارSnS2 بعنوان لایه بافر در سلول خورشیدی CuIn1-xGaxSe2 و مقایسه آن با CdS}, abstract_fa = {در این مقاله، ابتدا سلول خورشیدی CIGSe با نسبت مختلف Ga/Ga In بر اساس داده های تجربی با استفاده از نرم افزار SCAPS مدلسازی شده است. سپس، ترکیب SnS2 بعنوان بافری مناسب جهت حذف ترکیب سمی CdS مطرح شده است. با توجه به نتایج مدلسازی، SnS2 ماده ای بسیار مناسب جهت جایگزینی با ماده سمی CdS می باشد.}, keywords_fa = {سلول خورشیدی CIGS(e),نرم افزار SCAPS,لایه بافر,لایه نانوساختار SnS2,خمش نوار رسانش}, url = {https://nanomeghyas.ir/article_46477.html}, eprint = {https://nanomeghyas.ir/article_46477_7be46ca2a2f42ade373c3f76b189246a.pdf} } @article { author = {Feizpour, F. and Jafarpour, M. and Rezaeifard, A. and Pourtahmasb, M.}, title = {An Efficient and Green Synthesis of Quinoxaline and Pyridopyrazine Derivatives Using Maghemite Nanoparticles Supported Ascorbic Acid}, journal = {Nanoscale}, volume = {5}, number = {1}, pages = {105-115}, year = {2018}, publisher = {}, issn = {2423-5628}, eissn = {2423-5628}, doi = {}, abstract = {A new magnetically catalyst was synthesized by the immobilization of Ascorbic acid vitamin C on the surface of γ-Fe2O3 nanoparticles under ultrasonic agitation. The high catalytic efficiency of γ-Fe2O3@AA as a reusable organocatalyst in the synthesis of a wide variety of quinoxaline derivatives under mild eco-friendly conditions was exploited. Desired yields of heterocyclic compounds were obtained in the present method employing ethanol as an eco-friendly solvent under mild conditions. This novel magnetic catalyst could be easily separated from the reaction mixture by a magnetic bar and recovered at least five times without intense loss of its activity. Catalyst characterization was performed by using FT-IR, XRD, VSM and TEM.}, keywords = {Ascorbic acid,Green Chemistry,Magnetically recoverable catalyst,Quinoxaline}, title_fa = {سنتز سبز و کارآمد مشتقات کوئین‌اکسالین و پیریدوپیرازین با استفاده از آسکوربیک اسید تثبیت شده بر بستر نانوذرات مغناطیسی}, abstract_fa = {در این تحقیق کاتالیزور مغناطیسی جدیدی با تثبیت کردن آسکوربیک اسید ویتامین C بر روی سطح نانوذرات γ-Fe2O3 تحت امواج فراصوت سنتز شد γ-Fe2O3@AA. کارآیی کاتالیزوری γ-Fe2O3@AA به عنوان یک کاتالیزور قابل بازیابی در سنتز انواع مشتقات کوئین اکسالین تحت شرایط ملایم و سازگار با محیط زیست بررسی گردید. در این روش، بازده مطلوبی برای ترکیبات هتروسیکل با بکاربردن اتانول به عنوان حلال دوستدار محیط تحت شرایط ملایم بدست آمد. این کاتالیزور جدید مغناطیسی، بوسیله مگنت به آسانی از محیط واکنش قابل جداسازی بوده و حداقل پنج بار بدون کاهش در فعالیت کاتالیزوری قابل بازیابی می باشد. شناسایی کاتالیزور با استفاده از تکنیک‌های FT-IR, XRD, VSM و TEM انجام شده است.}, keywords_fa = {آسکوربیک اسید,شیمی سبز,کاتالیزور مغناطیسی قابل بازیابی,کوئین اکسالین}, url = {https://nanomeghyas.ir/article_46478.html}, eprint = {https://nanomeghyas.ir/article_46478_199fc98f019d9f7bf402628fa6b30d66.pdf} }